The EZ-TAG system represents the perfect simple solution for a wide
variety of access control applications
OPERATION
Users approach the keypad and enter a four digit code or hold a personal proximity tag within a few inches to activate one of the
EZ-TAGs on board relays. This relay in turn is used to carry power from a 12vdc power supply to an appropriate door release.
Higher levels of security can be obtained by requiring end users to enter both a code and present a tag for authorised entry.
EZ-TAG can also be used as a door bell for visitors.
PROGRAMMING
Programming the system is kept as simple as possible, all functions including
addition and removal of tags is carried out at the keypad itself, the unit is totally
self contained, no PC or laptop required.
INSTALLATION
EZ-TAG can be installed as a new stand alone access control system
simply by adding a 12vdc power supply and suitable door release or it can
be used to upgrade an existing system to allow entry of pre-authorised
visitors such as staff without bothering reception. In this case the power
supply and door release of the existing system is usually suitable for
use with the EZ-TAG. | | |
|
