The HXM series of low pressure plate mounted axial fans are ideally suited for a
wide range of general commercial and industrial large air volume ventilation applications.
The HXM series of low pressure axial / propeller fans
consist of (5) model sizes –200, 250, 300, 350 and 400mm nominal diameters respectively.
Each model includes a powerful direct drive, low pressure, speed controllable 230V 50Hz motor.
The motor and impeller assembly is then mounted in a strong pressed steel wall plate which
enables the fan to be mounted in any orientation for wall, ceiling or partition mounted installations.
The complete assembly is then supplied in a corrosion protected epoxy powder coated finish.
All HXM axial fans are suitable for speed control using Soler & Palau approved controllers.
The HXM series offers the perfect air moving solution for any installation
where the exhaust or supply of large air volumes is required.
.
| - Mounting plates
Formed from a galvanized steel sheet with a
beige epoxy-polyester paint finish. - Motor supports
Welded (models 200 to 300) or screwed (350 and 400) on the mounting plate, supplied with a steel wire motor side guard finished with a beige epoxy-polyester paint
| - Wall or ceiling mounting,
they are mainly used as general ventilation for:
cafes and coffee bars
commercial premises
small workshops
- Propellers
Made up of five blades manufactured from galvanized steel sheet and finished with a black epoxy-polyester paint.
|
|
