- Features
Two different widths are available with standard lengths up to 10m (elements can be reduced in length on site if necessary) - 4m ‘live’ and ‘neutral’ cables are fitted
- A number of elements are used to fill the floor area and are connected in parallel.
- Use with G16C programmable thermostat with both room and floor sensor
(must be ordered separately)
| - Selection
Draw a plan of the floor identifying areas occupied by fixed furniture such as kitchen cabinets (heating elements should not be installed in these areas). - Draw the heating elements side by side on to the plan leaving a minimum gap of 50mm between the wall and the edge of the heating element.
- Whenever possible, keep the element ends fitted with the live and neutral cables along one wall.
- This should be the same wall on which the thermostat is mounted.
|
