- Remote function operation.
The following operations of the fan can only be programmed after pressing the SPD button. - (I) TIMER
You can set the timer for l Hr, 2Hrs, 4Hrs and 8Hrs. The time selected is indicated by a RED LED. - (2) FAN SPEED
The fan speed can be set for (L) low, (M) middle and (H) high, by depressing the SPD button. The speed selected is indicated by a RED LED. - (3) SWITCH OFF
The fan can be turned off by depressing the OFF button. - (4) PRE-PROGRAM SYSTEM
Enjoy our computer program system by pressing the “MODE” button and select the functions. Press one time, the led will be on and in RED colour, press again GREEN colour, once again, ORANGE colour, The functions descriptions are following.
| - A: While the led is in RED colour, it is in RHYTHM wind mode. There are three levels-strong, middle and low RHYTHM wind. It cycles from low to middle, middle to high then, high to low, initial RHYTHM wind level on entering RHYTHM wind mode is the same as the ordinary wind level while leaving RHYHM wind mode.
- B: While the led is in GREEN colour, it is in SLEEP wind mode. The wind speed steps down automatically one level every 30 minutes and goes down to low wind level. If no “OFF-TIMER” is set, it stays in low wind level, otherwise it switches off when “OFF-TIMER” time out.
- C: While the led is in ORANGE colour, it is in RHYTHM SLEEP wind mode. In RHYTHM SLEEP wind mode, it outputs low, middle or high RHYTHM wind patterns and automatically steps down in one level every 30 minutes until reaches low level,
if no “OFF-TIMER” is set, it stays in low RHYTHM wind output,
otherwise it switches off with the “OFF-TIMER” . - (5) All the functions listed above can be controlled from 10 metres at least. If the remote control is mislaid then the functions may be controlled by pushing the receiver buttons directly.
|
