WAGOBOX Junction Box
Product Code: WA GOBOX
0
207-3302
Loading …
Maintenance Free
The Wago 222 and 773 Series terminal blocks are completely unlike screw terminals.
They are not susceptible to loosening due to temperature cycling, vibration or conductor settling over time.
The materials used in the Wago terminal blocks are inherently corrosion resistant and exert a specific pressure onto the conductors that prevents damage to the conductors but still gives a gas tight termination every time.
WAGOBOX Junction Box
Installing a Wagobox can take as little as 25% of the time it takes to install a BS6220 style junction box.
All the cables can be stripped back to as installer friendly 60mm before fitting the terminal blocks.
The Wagobox uses Wago 222 & 773 Series terminal blocks which are quick to fit,
but as these are also fitted outside of the box there is none of the time consuming fiddling
about trying to get the cables cut to size and into position inside a small space.
Easy to Use
The Wagobox has been designed to be easy to use with the Wago 773 and 222 Series of terminal blocks.
Once the cables have been connected, the terminal blocks can be easily slid into position before securing the cables.
The cable gripper is very easy to configure, no screws or fiddly clamp bars in this box.
Each gripper slot has it's own black plastic pressure spring that can be installed into one of two slots or simply removed.
Use a pair of cutters or narrow nosed pliers to position the gripper spring and then push the cables into position.
The cables will be clamped and secure in a matter of a few seconds.
-
Totally Secure
The integrated cable gripper can secure flex and 6242Y and 6243Y cables from 1.0mm² to 6.0mm² in seconds.
The snap shut lid locks into place and closes the gripper slots preventing any cables from working free. - 39mm x 44mm x 108mm
-
Adaptable
From the position of the gripper to the choice of the terminal blocks the Wagobox can be configured to suit the job. Connecting LV lighting transformers, distributing power to multiple loads or simply extending an oven circuit are all possible with the Wagobox.
Maintenance Free
The Wago 222 and 773 Series terminal blocks are completely unlike screw terminals.
They are not susceptible to loosening due to temperature cycling, vibration or conductor settling over time.
The materials used in the Wago terminal blocks are inherently corrosion resistant and exert a specific pressure onto the conductors that prevents damage to the conductors but still gives a gas tight termination every time.
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
|
WA GOBOX
WAGOBOX Junction Box |
Wago 773 Series Push Wire Connectors
Loading …
WA 104
WA 104
WA 106
WA 108
See product for Accessories, Connectors and Fixing Screws
Wago 773 Series Push Wire Connectors
Available in 2, 4, 6 and 8 pole,
these colour coded connectors are suitable for 0.75mm2 to 2.5mm2 solid and 1.5mm2 to 2.5mm2 stranded conductors.
The new 3 pole version is suitable for solid and stranded conductors from 1.5mm2 to 6mm2.
Each of the connectors has a testing point in the housing.
A fixing carrier is available that is designed to secure the connectors into a junction box
or onto a DIN 35 Rail.
Operating Instructions
Simply strip the conductors 12mm, then push the conductor into the connector.
The transparent housing provides a visible indication that the conductor is secure.
The conductors can be removed by twisting and pulling the conductor at the same time.
-
Notes
Connectors should be used within a suitable enclosure.
but can be installed in a cavity when installing backless equipment, such as a domestic style luminaire, ( it is possible for the enclosure to be formed or completed by the fitting or suitable material considered to be non-combustible)
- There is no requirement to secure the terminal blocks providing the cables are glanded or secured outside the enclosures with clips/saddles.
- IP20 protection on connectors.
- All WAGO connectors are re-usable.
- See each product
| See product for Accessories, Connectors and Fixing Screws |
Technical:See each product |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
Wago 222 Series Lever Splicing Connectors
Loading …
WA 413
WA 412
WA 415
WA GOBOX
See product for Accessories, Connectors and Fixing Screws
Wago 222 Series Lever Splicing Connectors
max. continuous service temperature 85°c
The popular Series 222 commoning connector from WAGO is available in 2, 3 or 5 pole versions.
The beauty of the 222 series of connector is the simplicity and flexibility of connection.
The connector can accept Solid, Stranded and flexible conductors, no tools required.
Operating Instructions
Simply flip up the integrated orange lever to vertical position,
opening the CAGE CLAMP®, insert the stripped conductor, then return the lever to the horizontal position,
closing the CAGE CLAMP® to give a perfect gastight connection every time.
-
Applications
Low voltage lighting system
including Uplighters and downlighters - HVAC control circuit
- Junction boxes in wall or ceiling
- Mobile homes
-
Notes
Connectors should be used within a suitable enclosure.
but can be installed in a cavity when installing backless equipment, such as a domestic style luminaire, ( it is possible for the enclosure to be formed or completed by the fitting or suitable material considered to be non-combustible) - There is no requirement to secure the terminal blocks providing the cables are glanded or secured outside the enclosures with clips/saddles.
- IP20 protection on connectors.
- All WAGO connectors are re-usable.
- See each product
| See product for Accessories, Connectors and Fixing Screws |
Technical:See each product |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
Accessories
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
