415V S-Type
Industrial Bolted Pattern
Offset Contacts

ASTA Certified to BS 88: Part 2 1988. Comply with IEC 269 Parts 1 & 2.
Tested to 80kA at 415V AC.

415V S-Type
Industrial Bolted Pattern
Centre Contacts

ASTA Certified to BS 88: Part 2 1988. Comply with IEC 269 Parts 1 & 2.
Tested to 80kA at 415V AC.

415V SN-Type
Staggered Contacts

ASTA Certified to BS 88: Part 6 1988. Ref. F1
Tested to 80kA at 415V AC.
This range of HRC fuselinks has staggered contacts and is for use in industrial and general applications. Special motor rated fuselinks are listed

415V SP-Type
Staggered Contacts

ASTA Certified to BS 88: Part 6 1988. Ref. F1
Tested to 80kA at 415V AC.
This range of HRC fuselinks has staggered contacts and is for use in industrial and general applications. Special motor rated fuselinks are listed

240V SS-Type
Staggered Contacts

ASTA Certified to BS 88: Part 6: 1988
Breaking Capacity of 16kA at 240V AC.This range of fuselinks is available for general lighting and heating.

415V R-Type
Ferrule Cap Pattern

Breaking capacity 33kA at 415V AC to BS 1361: 1971
These HRC cartridge fuselinks are for use in house service cut-outs by Electricity Companies in the UK and by Supply Authorities elsewhere.
They also comply fully with the dimensional power-loss, fusing factor, discrimination and time-current characteristic requirements of BS 1361: 1971. Fusing factors do not exceed 1.5. ASTA certified in accordance with BS 1361 Type IIa and IIb. Time-current characteristic curves available on request.

240V LC-Type
Ferrule Cap Pattern

ASTA Certified to BS 1361: 1971: Type 1
Category 240AC16.
These ferrule cap fuselinks are for use in domestic installations for lighting and heating circuits. All, except List No. 1505LC and 1510LC, have been type tested and ASTA certified in accordance with BS 1361: 1971: Type 1.
Category of Duty 240AC16. List No. 1505LC and 1510LC which are non standard ratings in the 15A barrel have been type tested to BS 88: 1967 and are colour coded black.