to the 16th Edition IEE Regulations

chapter 5

chapter 6

  5.1 - The earthing principle 5.6 - Protective multiple earthing (PME)
  5.2 - Earthing Systems 5.7 - Earthed concentric wiring
  5.3 - Earth fault loop impedance 5.8 - Other protection methods
5.4 - Protective conductors 5.9 - Residual current devices (RCDs)
5.5 - Earth electrodes

5.10 - Combined functional and protective

5.1.3 - The disadvantages of earthing

The two important disadvantages are:

1. - Cost: the provision of a complete system of protective conductors, earth electrodes, etc. is very expensive.

2. - Possible safety hazard: It has been argued that complete isolation from earth will prevent shock due to indirect contact because there is no path for the shock current to return to the circuit if the supply earth connection is not made (see {Fig 5.3(a)}). This approach, however, ignores the presence of earth leakage resistance (due to imperfect insulation) and phase-to-earth capacitance (the insulation behaves as a dielectric). In many situations the combined impedance due to insulation resistance and earth capacitive reactance is low enough to allow a significant shock current (see {Fig 5.3(b)}).

Fig 5.3 - Danger in an unearthed system

a) apparent safety: no obvious path for shock current
b) actual danger: shock current via stray resistance and capacitance



Return to top of page

Extracted from The Electricians Guide Fifth Edition
by John Whitfield
Published by EPA Press Click Here to order your Copy

Click here for list of abbreviations