Luxair Anzi Ceiling Cooker Hoods

Loading …

Luxair
Anzi Ceiling Cooker Hoods
This stunning handmade Italian crafted master piece, is the very best in quality,
The Anzi ceiling extractor comes with a very slim motor that will fit most UK ceiling height joists.

This extractor has LED lighting and is easy to install either into your ceiling direct or simply lower a box section on your existing ceiling.
Fitted with a very powerful 1200m³/hr motor, it comes with remote control and a beautiful Matt Black finish, with Matt Black centre panel and LED illumination for added soft dining.

This ceiling extractor can installed with the motor attached separately in the loft or attached to the top of the cooker hood. see instructions for further details on this! This hood must be installed on minimum 6" / 150mm round ducting or rectangular equivalent. Our equivalent ducting is 180mm x 95mm.
This will allow for the highest extraction rate possible for the hood and aid in reducing noise from the motor. This hood must not be installed higher than 2 meters above your hob.

PLEASE NOTE: IF YOU ARE REMOVING THE NEW SLIMLINE MOTOR TO USE FROM A SEPARATE LOCATION, YOU MUST PURCHASE THE REMOVABLE MOTOR BOX
The removable remote box consists of:
A backing plate to fit the hood
A wall mountable box to situate the motor.
x2 Round to Rectangular Adapters to fit rigid ducting to the mountable box
x2 Adapters
See product for Accessories

Technical:

Dimensions Dimensions Dimensions

Luxair 90cm Anzi Ceiling Hood for use with External Motor

Loading …

CH 90ANZI/EXT/BLK

CH 90ANZI/EXT/SS

CH 90ANZI/EXT/WHT

Luxair
90cm Anzi Ceiling Hood
for use with External Motor
This stunning handmade Italian crafted master piece, is the very best in quality.
This extractor has LED lighting, easy to install either into your ceiling or simply lower a box section on your existing ceiling, very powerful 1200m³/hr External motor, remote control, high grade Stainless Steel finish.
This ceiling extractor is designer to be installed with a powerful external weatherproof motor that can be ducted up to 6 metres.
Luxair has 3 different external motors available: Wall Mounted External Moto
These motors are ideal for situating on an external house wall.
They have a flat rear side that fits flush against the wall. Pitched Roof External Moto
These motors are best in installed on an angled roof.
They have an angled under side so that the exhaust of the motor is not blowing directly on to your roof tiles. Flat Roof External Motor - These motors are best suited to being installed on a flat roof. A tower unit is provided to raise the motor from the roof so that the motor is not blowing directly on to your roof tiles. 150mm round (Or rectangular equivalent - 180mm x 95mm) ducting must be used on all Luxair external motors.
This will allow for the highest extraction rate possible for the hood and aid in reducing noise from the motor.
Using ducting less than 150mm (6"") will invalidate your warranty (Subject to registration).
This hood must not be installed higher than 2 meters above your hob.
  • See each product
See product for Accessories

Technical:

See each product

Luxair Celux Cook Hood

Loading …

CH 90CELUX/SM/BLK

CH 90CELUX/SM/SB

CH 90CELUX/SM/SS

CH 90CELUX/SM/WHT

CH 90CELUX/SM/WS

Luxair
90cm Celux Cook Hood
with Slimline Motor + Push Fit Bracket
The Celux designer ceiling extractor has a contemporary Stainless Steel finish and is the very best in Italian quality.
This Celux is now upgraded to have a slimline motor and new push clip fittings allowing for an easier installation.
The Celux has been designed to fit flush to your ceiling or into a drop down box lowered from your ceiling.

Finished in a stunning mix of colours and high grade stainless steel in both 90cm x 60cm and 120cm x 60cm.

The Slimline Celux is available in many different variations:
Black frame with Black Glass Panel
Stainless Steel frame with Black Glass Panel
White frame with White Glass Panel
Stainless Steel frame with White Glass Panel

The Slimline Celux extractor is finished in stainless steel and manufactured by expert Italian engineers with years of knowledge and experience. This hood has a high powered 'B' rated 950m³/hr energy efficient motor to keep your energy usage to a minimum and 2 energy efficient LED strips. A very easy to use unique remote control fob operates the lights and motor functions.

All Luxair kitchen hoods come with mesh grills as standard to catch grease and are dishwasher safe. All Luxair ceiling extractors can be ducted out to ensure a fresh odour free kitchen area.

This hood must be installed on minimum 6" / 150mm round ducting or rectangular equivalent. Our equivalent ducting is 180mm x 95mm. This will allow for the highest extraction rate possible for the hood and aid in reducing noise from the motor.
See product for Accessories

Technical:

Dimensions

Luxair Cosmic Ceiling Cooker Hood

Loading …

CH 90COSMIC/BLK

CH 90COSMIC/WHT

CH 90DELUX/SM/SS

Luxair
Cosmic Ceiling Cooker Hood
90cm x 60cm
Quality designer ceiling extractor exclusive to Luxair, this stunning designer ceiling hood really has it all, a massive 950 m³/hr motor that can extract up to 6 meters, this extractor looks beautiful in any modern kitchen, fully remote control operation.

The outer edge of this hood is stainless steel, the underside of the ceiling hood is black glass with 2 x LED lighting strips either side. This designer hood is fitted with Luxair's new A rated energy efficient motor and easy clean metal grease filters accessible from the drop down glass centre panel. This hood is one of the most refined ceiling hoods on the market, offering modern designer looks with high exraction rates.

You will not find this hood anywhere else other than from Luxair!

The Cosmic Ceiling hood is easy to install, simply secure the 4x threaded rods in position then lift the hood and secure to the rods. These can be cut to size should for the needs of your installation.

We offer a free full seven years parts and labour warranty (Subject to registration) * please see our terms and conditions *

This hood must be installed on minimum 6" / 150mm round ducting or rectangular equivalent. Our equivalent ducting is 180mm x 95mm. This will allow for the highest extraction rate possible for the hood and aid in reducing noise from the motor. This hood must not be installed higher than 2 meters above your hob.
See product for Accessories

Technical:

Dimensions CHCFCOSM Data

Luxair 90cm Delux Stainless Steel cooker Hood

Loading …

CH 90DELUX/SM/SS

Luxair
90cm Delux Stainless Steel cooker Hood
4 x LED lights
with Slimline Motor + Push Fit Bracket
The new stunning designer Delux ceiling extractor is the very best in Italian quality. The Delux SM is now upgraded to have a slimline motor and new push clip fittings allowing for an easier installation. This hood has been designed to fit flush to your ceiling or into a drop down box lowered from your ceiling.

This hood has an impressive 950m³/hr motor and 4 bright energy efficient LED spot lights. A remote control operates the lights and motor.

This Slimline Delux extractors are manufactured using 18/10 grade stainless steel and are ideal for use over range cookers. Promoting energy efficiency the Delux SM has a high powered 'B' rated 950m³/hr motor to keep your energy usage to a minimum and 4 x energy efficient LED spot lights. A very easy to use unique remote control fob operates the lights and motor functions. This hood must be installed on minimum 6" / 150mm round ducting or rectangular equivalent. Our equivalent ducting is 180mm x 95mm. This will allow for the highest extraction rate possible for the hood and aid in reducing noise from the motor.
See product for Accessories

Technical:

Dimensions

Luxair_Ceiling_Gealux

Loading …

Luxair
90cm Gealux Cook Hood
with Slimline Motor + Push Fit Bracket
The new stunning designer Gealux ceiling extractor is the very best in Italian quality. The Gealux SM is now upgraded to have a slimline motor and new push clip fittings allowing for an easier installation. This hood has been designed to fit flush to your ceiling or into a drop down box lowered from your ceiling.

This hood has an impressive 950m³/hr motor and 4 bright energy efficient LED spot lights. A remote control operates the lights and motor.

This Slimline Gealux extractors are manufactured using 18/10 grade stainless steel and are ideal for use over range cookers. Promoting energy efficiency the Delux SM has a high powered 'B' rated 950m³/hr motor to keep your energy usage to a minimum and 4 x energy efficient LED spot lights. A very easy to use unique remote control fob operates the lights and motor functions. This hood must be installed on minimum 6" / 150mm round ducting or rectangular equivalent. Our equivalent ducting is 180mm x 95mm. This will allow for the highest extraction rate possible for the hood and aid in reducing noise from the motor.
See product for Accessories

Technical:

Delux - GeaLux - Install 2.6Mb Dimensions - CH90Delux

Luxair Jupiter Ceiling Hood

Loading …

Luxair
Jupiter Ceiling Hood
This Jupiter ceiling cooker hood is unique in every dimension. The size of this ceiling extractor is 120cm x 50cm, it can be used in a number of installation ways, either have the ceiling hood flush into your ceiling, or have it surface mounted by simply ordering the optional extra drop down box section to suit. You can also recirculate this hood using a recirculating frame. This is a simple bolt on to the drop down box

The Jupiter ceiling extractor can be ducted to the outside or re-circulated back into the room using the optional re-circulating frame that is simply attached to the top of the drop down box, allowing the air to flow back into the room, you will need to order the charcoal filters to purify the air if you are using this in re-circulation mode. This box and recirculating frame are hand finished steel painted white to blend with your ceiling and the rest of the hood.
The outer ring is black glass and the inner glass panel is lit with 4x LED lights, this unit is fully remote control operated with filter alarm. The metal grease filters are accessible by pulling down the centre glass panel, you can then simply place the washable metal filters in your dishwasher.

This hood must be installed on minimum 6" / 150mm round ducting or rectangular equivalent. Our equivalent ducting is 180mm x 95mm. This will allow for the highest extraction rate possible for the hood and aid in reducing noise from the motor. This hood must not be installed higher than 2 meters above your hob.

Technical:

Dimensions
 
Order Code
Description
Price (ex VAT)
Price (inc VAT)
Quantity