Axial Flow Extractor Fans - IP44

product photo
Axial Flow Fans
The HXM series of low pressure plate mounted axial fans are ideally suited for a
wide range of general commercial and industrial large air volume ventilation applications.

The HXM series of low pressure axial / propeller fans
consist of (5) model sizes –200, 250, 300, 350 and 400mm nominal diameters respectively.
Each model includes a powerful direct drive, low pressure, speed controllable 230V 50Hz motor.
The motor and impeller assembly is then mounted in a strong pressed steel wall plate which
enables the fan to be mounted in any orientation for wall, ceiling or partition mounted installations.
The complete assembly is then supplied in a corrosion protected epoxy powder coated finish.

All HXM axial fans are suitable for speed control using Soler & Palau approved controllers.

The HXM series offers the perfect air moving solution for any installation
where the exhaust or supply of large air volumes is required.

.

  • Mounting plates
    Formed from a galvanized steel sheet with a
    beige epoxy-polyester paint finish.
  • Motor supports
    Welded (models 200 to 300) or screwed (350 and 400) on the mounting plate, supplied with a steel wire motor side guard finished with a beige epoxy-polyester paint
  • Wall or ceiling mounting,
    they are mainly used as general ventilation for:
    cafes and coffee bars
    commercial premises
    small workshops
  • Propellers
    Made up of five blades manufactured from galvanized steel sheet and finished with a black epoxy-polyester paint.
  • See each product
See product for Accessories

Technical:

See each product
 
Order Code
Description
Price (ex VAT)
Price (inc VAT)
Quantity

Compact Plate Axial Extractor Fans

product photo
Soler & Palou
Compact Plate Axial Fans - Single phase; 4 Pole 240v - IP65
COMPACT Series
(Aluminium Impellers)
Range of low profile plate mounted axial fans fitted with aluminium impellers

Applications - Warehouses, Workshops, Commercial Premises, Car Parks,
Greenhouses, Agricultural Extract, Painting Installations, Air conditioning Equipment

Previously Branded Vent Axia
See product for Accessories

Technical:

Plate Axial Fans - 500kb pdf

Wire Guards for HCBB Compact Axial Extractor Fans

product photo
Wire Guards
for HCBB Compact Axial Fans
Square Discharge Wire Protection Guard

Protection guard to prevent any contact with the fan impeller.
  • Width of the wire gaps (mm):
  • 10,6 x 10,6 (from 250 models to 525)
  • 25 x 25 (from 630 models to 1000)

Technical:

Axial Fan Accessories - 700kb pdf
 
Order Code
Description
Price (ex VAT)
Price (inc VAT)
Quantity

Back Draft Shutters

product photo
Axial Plate Fan
Back Draft Shutters
Louvre back draft shutters manufactured totally from UV stabilized plastic material.

Supplied as standard in grey colour.

Suitable for agricultural exhaust or supply air applications (high protection against corrosion).

Technical:

Axial Fan Accessories - 700kb pdf
 
Order Code
Description
Price (ex VAT)
Price (inc VAT)
Quantity