Code: 18844 Date of Issue: July 1999 Version: 1

1. Preparation and Company Identification
Preparation trade name: GRIPSEAL FOAM 'N' FILL

Company name, address and normal telephone number:-
LAYBOND PRODUCTS LTD, Riverside, Saltney Tel: (UK) 01 244 674774
Chester CH4 8RS, England (ABROAD) +44 1244 674774

Emergency telephone number:- As above

2. Composition/Information on Ingredients
A preparation of propellant, Isocyanate and urethane prepolymer
CAS Number: Chemical Name: %: Classification:

4,4' DI ISOCYANATE < 10 Xn; R20, 36/37/78, 42
13674-84-5 TRICHLOROPHOPYL PHOSPHATE < 20 Xi: R36/38
3. Hazard Identification: - Harmful by inhalation, R20, irritating to eyes, respiratory system and skin R36/37/38. May cause sensitisation by inhalation R42. Formation of explosive gas - air mixture is possible in non-ventilated areas.

4. First Aid Measures:-

Inhalation: Remove to fresh air. If discomfort persists seek medical advice
Skin Contact Remove contamination with proprietary skin cleaner, followed by washing with soap and water. This procedure should also be followed prior to eating drinking, smoking and toilet functions.
Eye Contact: Irrigate immediately with clean water for 15 minutes and obtain medical attention
Ingestion: If swallowed, seek medical advice immediately. Do not induce vomiting.

5. Fire-Fighting Measures:
Suitable Extinguishing Media: Dry Powder, Foam, Sand, Earth
Unsuitable Extinguishing Media: CO2
Special Exposure Hazards in Fires: None known
Required Special Protective
Equipment for fire fighters:
Wear suitable protective clothing. Self contained breathing apparatus

6. Accidental Release Measures:

Contain flow with absorbent material. Prevent spills from entering drains and sewers. Dispose of at an appropriate licensed waste disposal site in accordance with current laws and regulations. Spilled material will polymerise under atmospheric moisture.

7. Handling and Storage-
Handling: Ensure adequate ventilation.
Storage: Store between 5 and 30oC in tightly sealed containers. Keep away from foodstuffs.

8. Exposure Controls:-
Respiratory Protection:
None required at normal levels of ventilation. Breathing mask in poorly ventilated areas
Hand Protection: Protective Gloves
Skin Protection: Not normally required.
Eye Protection: Not normally required.
9. Physical and Chemical Properties:-
Off white Flammability: Not applicable
Odour: Autoflammability: Not determined
pH: N/A Explosive Properties: Not applicable
Boiling point Oxidising Properties: Not applicable
/boiling point range: Vapour Pressure: Not determined
Melting point/ Relative Density: Approx 1.1
Melting point range: Solubility (water and fat) Insoluble
Flashpoint (oC):
10. Stability and Reactivity: Stable
Hazardous decomposition products: Carbon dioxide forms in reaction with water
11. Toxicological Information: May cause sensitisation by inhalation
12. Ecological Information: The preparation has not been tested
13. Disposal Considerations: Disposal of material in accordance with local regulations
14. Transport Information:- IMDG: Class 2 UN 1950 Proper Shipping Name: Aerosol
15. Regulatory Information:
XN - Harmful F - Extremely Flammable Contains:Diphenylmethane - 4,4'-diisosyanate
R 20: Harmful by inhalation
R36/37/38: Irritating to eyes, respiratory system and skin
R42: May cause sensitisation by inhalation
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28: After contact with skin wash immediately with plenty of water and soap
S38: In case of insufficient ventilation, wear suitable respiratory equipment
S45: In case of accident or if you feel unwell, seek medical advice immediately (show label where possible).
Other: Pressurised container. Protect from sunlight and do not expose to temperatures exceeding 50oC. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - No smoking. Keep out of reach of children. Without adequate ventilation formation of explosive mixtures may be possible.
16. Other Information:

The data contained in this Safety Data Sheet has been supplied as required by the Chemical (Hazard Identification and Packaging) Regulations 1993, as amended, for the purpose of protecting the health and safety of industrial and commercial users who are deemed capable of understanding and acting on the information provided.
Please ensure that it is passed to the appropriate person(s) in your company, who are capable of acting on the information.