WBS and BEAB approved.
Manufactured in the UK in a BS EN ISO 9002 registered factory.

7 and 15 litre.

Outer Casing:
White stove-enamelled corrosion-resistant steel with white trim.

1.0kW, 3kW @ 240V (7 litre).
0.9kW, 2.8kW @ 230V (7 litre).
3.0kW @ 240V (15 litre).
2.8kW @ 230V (15 litre).

Safety Features:
Dry-start cut-out.

Thermal Insulation:
Flame-retardant polystyrene foam.

Thermostat Spec:
7" Stem-type thermostat adjustable between 10°C and 80°C on 7 litre. 11" on 15 litres.

Water Container:
Copper. Tested to 1.38 bar (20 psi).

Installation Details

Only vented taps or accessories must be used with Express heaters.

Cable entry in base of unit.
Must be permanently connected to the electrical supply through a double-pole linked isolating switch with a minimum rating of 13A (3kW models) or 5A (1kW model).

Wall mounting by three keyhole fixings using screws and plugs supplied. A template is provided to assist in positioning.

Supply direct from rising main or cistern (minimum head 4m).
For oversink installations the inlet connection uses a 15mm compression fitting via valve provided.
Outlet spout is a push-fit.
For undersink installation connections must be from base of unit using 15mm compression or push-fit inlet and 15mm push-fit outlet connection (not supplied) together with Streamline option packs J, K, M, P, Q, R or S.

Dimension diagrams pdf 6kb - Click Here