The latest Quinetic switch design for indoor and outdoor use

Can be used with any receiver including dimming receivers

Dimming Quinetic Wireless Switch has a formidable range being effective up to 25m indoors and 80m outdoors.

The IP protection level is IP67 and it can prevent the damage of the switch
from rain or from water spray in daily life making it ideal for outdoors and bathrooms.

Innovation of Wireless Kinetic Technology
The Quinetic wireless switch has a built-in micro energy generator.
The action of pressing the switch, generates enough kinetic energy to create and transmit a radio signal
and switch on/off via a receiver (wireless controller) the lamp or other loads
This solves an age old problem of having to install switch wiring over the past 130 years since
the invention of the light bulb

No Wiring. No Battery. Easy Installation

The Quinetic In-Line Receiver Switch is a direct replacement for the
traditional wall switch in your home/building.

This new addition for the range combines the wireless receiver normally housed in the ceiling with the wall switch, thus facilitating additional wireless two way or more switches to the circuit.

Please note: the Quinetic In-Line Receiver Switch cannot be paired with other Quinetic receivers,
it can only be paired with Quinetic switches (up to 5).

New design best used with QU WS switches - see bottom 3 product lines listed below

No Wiring. No Battery. Easy Installation and Usage.

The Quinetic wireless architrave switch is compatible with architrave flush and surface boxes.

It can be used with the standard or with the dimming Quinetic receiving controllers.

It has a built-in micro energy generator - when the switch is pressed the kinetic system transforms the movement into energy.
This transmits a signal to the receiver to turn the lamp or other load on or off.
This solves the issue of having to install switch wiring which has been a problem
ever since the invention of the lamp.

A controller can be controlled by a maximum of 10 separate switches, a switch can pair an unlimited number of controllers.

Innovation of Wireless Kinetic Technology
The Quinetic wireless switch has a built-in micro energy generator.
The action or pressing the switch, generates enough kinetic energy to create and transmit a radio signal
and switch on/off via a receiver (wireless controller) the lamp or other loads
This solves an age old problem of having to install switch wiring over the past 130 years since
the invention of the light bulb

No Wiring. No Battery. Easy Installation

Quinetic D11W & D12W Switches can be used with R301 or RW01 wireless dimming controller

Innovation of Wireless Kinetic Technology
The Quinetic wireless switch has a built-in micro energy generator.
The action or pressing the switch, generates enough kinetic energy to create and transmit a radio signal
and switch on/off via a receiver (wireless controller) the lamp or other loads
This solves an age old problem of having to install switch wiring over the past 130 years since
the invention of the light bulb

No Wiring. No Battery. Easy Installation

The Quinetic wireless key fob switch is portable and very easy to use.
It has a built-in micro energy generator.
When the switch is pressed, the kinetic system transforms the movement into energy.
This transmits a signal to the receiver to turn the lamp or other load on or off.

Solving the issue of having to install switch wiring which has been a problem ever since the invention of the lamp.

No Wiring. No Battery. Easy installation and usage.

The key fob switch is portable and can be used from up to a maximum distance of 80m oudoors or 25m indoors. There is no longer a need to install back boxes, make holes or channel out for switch lines in the wall if you use the Quinetic wireless switch. The Quinetic switch is safe, convenient and extremely simple to install and use.

N.B. Can be used for dimming when combined with a dimmable receiver.

The Quinetic Wireless Dimmer Module is a push type button switch (not rotary)
with an interchangeable knob, compatible with most dimmers on the market, offering
high installation flexibilty.

Designed to replace an existing dimmer module with a Quinetic Switch/Dimmer,
whether it be on a standard white plate or a decorative finish.

It can be used as a simple on/off switch when paired with a standard Quinetic receiver,
or can be fully dimmable when paired with a dimming Quinetic receiver.

The Quinetic wireless grid switch is compatible with BG R range Nexus grid system and can be
installed into BG Nexus grid plates.

The switch cover is interchangeable, allowing the usage of any BG R Range Nexus Grid switch cover.

It can be used with the standard or with the dimming

Quinetic receiving controller. It has a built-in micro energy generator
when the switch is pressed the kinetic system transforms the movement into energy.
This transmits a signal to the receiver to turn the lamp or other load on or off.

Can be used along side mains voltage gridswitches

No Wiring. No Battery. Easy installation and usage.

The Quinetic wireless grid switch is compatible with MK grid plus system
and can be installed into MK grid plus plates.

It can be used with the standard or with the dimming Quinetic receiving controller.

It has a built-in micro energy generator - when the switch is
pressed the kinetic system transforms the movement into energy.

This transmits a signal to the receiver
to turn the lamp or other load on or off.

This solves the issue of having to install switch wiring
which has been a problem ever since the invention of the lamp.

Can be used along side mains voltage gridswitches

No Wiring. No Battery. Easy installation and usage.

The Quinetic wireless grid switch is compatible with Varilight Powergrid system
and can be installed into Varilight Powergrid plates.

It can be used with the standard or with the dimming Quinetic receiving controller.

It has a built-in micro energy generator - when the switch is
pressed the kinetic system transforms the movement into energy.

This transmits a signal to the receiver
to turn the lamp or other load on or off.

This solves the issue of having to install switch wiring
which has been a problem ever since the invention of the lamp.

Can be used along side mains voltage gridswitches

No Wiring. No Battery. Easy installation and usage.

The Quinetic wireless grid switch is compatible with Click Mode MiniGrid system and can be
installed into Click Mode MiniGrid plates.

It can be used with the standard or with the dimming receivers

Quinetic receiving controller. It has a built-in micro energy generator
when the switch is pressed the kinetic system transforms the movement into energy.
This transmits a signal to the receiver to turn the lamp or other load on or off.

Can be used alongside mains voltage gridswitches

The Kinetic wireless grid switch is compatible with Knightsbridge range grid system and can be installed into Knightsbridge grid plates.

The switch cover is interchangeable, allowing the usage of any Knightsbridge Grid switch cover.

It can be used with the standard or with the dimming Quinetic receiving controller.

It has a built-in micro energy generator - when the switch is pressed the kinetic system transforms the movement into energy - This transmits a signal to the receiver to turn the lamp or other load on or off.

The grid switch can be used from a maximum 30m indoors.

There is no longer a need to make holes or channel out for switch lines in the wall if you use the Quinetic wireless switch.

The Quinetic switch is safe, convenient and extremely simple to install and use.

The Quinetic wireless grid switch is compatible with the Hager Sollysta range grid system
and can be installed into Hager Sollysta grid plates.

It can be used with the standard or with the dimming Quinetic receiving controller.

It has a built-in micro energy generator - when the switch is
pressed the kinetic system transforms the movement into energy.

This transmits a signal to the receiver
to turn the lamp or other load on or off.

This solves the issue of having to install switch wiring
which has been a problem ever since the invention of the lamp.

Can be used alongside mains voltage grid switches.

No Wiring. No Battery. Easy installation and usage.

Requires a Quinetic Wireless Receiver

The Quinetic wireless door switch was designed for a easy trigger of lights
when a door is opened or closed. Simply pair the door contact switch
with the Quinetic wireless receiver, to control the lights inside the cabinets
Use with standard doors, sliding doors, drawers, etc.

QUPIR can be paired with any Quinetic controller to automatically turn ON the lamp after the sensor senses the human body, and automatically turn OFF the lamp after the human body is not sensed.

The sensor has adjustable lux level, time and detection distance functions, and IP65 weatherproof capability (using the included IP65 Silicone cover).

It is suitable for indoor and outdoor use, where automatic control of the lights is needed.

Compatible with most LTQSF Quinetic Floodlights

Can be mounted at: 90°.

Battery Included (PB CR2450).

This ceiling-mounted, infrared motion sensor can either be embedded in the ceiling or mounted on a flat surface, making installation flexible and versatile, and is powered by a CR123A battery (or can be wired for AC power).

Once the ceiling PIR is paired with a Quinetic wireless receiver, it can turn ON the light/load by wireless control
upon detection of a presence, and turn OFF the light/load once no presence is detected.

The sensor comes ready to be recess mounted. If the ceiling mounted version of the sensor is required,
the PIR can be separated from the recessed base by pressing the buckles at both ends of the base to detach it.

This sensor solution is suitable for use in homes, classrooms, offices, warehouses
or other places where automatic control of lighting is needed.

The WiFi Quinetic Smart Pendant dimming wireless controller, with a high-efficiency switching power supply,
has a wide voltage range with excellent stability and durability.

It supports WiFi 2.4Ghz and RF 433MHZ to control the light connected using Quinetic switches or
phone APP (iPhone and Android) and has a load capacity of 1.0A.

Using the Kinetic Switch APP, it can be voice controlled and easily programmed for various mood scenes as well as having a timing function - compatible with Amazon Alexa and Google Home.

The Quinetic Smart Pendant is the right choice if you want to easily control a single pendant light.

The Quinetic wireless controller with a high-efficiency switching power supply has a wide
voltage range with excellent stability and durability.

A load capacity of 6A or 16A relay. The Quinetic wireless controller is equipped with an in-rush
current suppression function, creating a safe and durable product.

Wireless Quinetic energy switch and wireless receiving controller can be paired
with any combination: a controller can be controlled by a maximum of 10
separate switches, a switch can pair an unlimited number of controllers.

Now with integrated push-in terminals.

The WiFi Quinetic wireless receiving controller with a high-efficiency switching power
supply has a wide voltage range with excellent stability and durability.

Can be controlled by a smartphone APP (iPhone and Android)
RW01 has a load capacity of 1.0A.
RW03 has a load capacity of 5.0A.

The WiFi wireless receiving controller is equipped with an in-rush current suppression function thus creating a safe and durable product.

Wireless Quinetic energy switch and wireless receiving controller can be paired
with any combination: a controller can be controlled by a maximum of 10
separate switches, a switch can pair an unlimited number of controllers.

The QURWST WiFi LED tape controller can switch ON/OFF and dim 12-24V LED tape

There are two control methods: wireless Quinetic switch and “Kinetic Switch” App.p.

Using the Kinetic Switch APP it can be voice controlled and easily realize scene and timing control.

This MINI version of our larger controllers has been designed to fit in to places that others cannot.

We have packed in some exciting features, such as the ability to connect standard switch lines, thus creating a hybrid between your existing wired light switch (which can remain in use) and the ability to connect all the other Quinetic switches with it.

It is also wifi enabled thus utilizing the SMARTLIFE APP you can add features such as dimming; voice control; timing control etc.

The Quinetic WiFi Mini receiver has a 1A capacity output the equivalent of 150 (LED) watts and is dimmable with the standard range of Quinetic switches.

Like others in the range it can be paired with up to 10 wireless switches thus creating a wireless control system.

Amazon Alexa & Google Home compatible

These Mini On/Off receivers work with traditional switches, creating a hybrid between your existing wired light switch (which can remain in use) and the ability to connect all the other Quinetic switches with it.

Using the Kinetic Switch or Smartlife APP it can be voice controlled with scene and timing control.

The reduced dimensions allow it to be installed in places that other receivers cannot, such as switch sensor, ceiling lights panel, etc.
It can be paired with up to 10 wireless switches (QURWM23 - 10 per channel), thus creating a wireless control system.

Amazon Alexa & Google Home compatible.

The QURWCS Quinetic Roller Shutter & Curtain Receiver controller is used to control roller shutters, curtains or vertical blinds.

The receiver can be operated by 2 gang or 3 gang Quinetic wireless switches and it also has a hardwired switch input interface
which supports traditional shutter/curtain switches for dual or multiple control, in a dual-button mode for roll-down shutter functions (open, stop and close) or in a dual-button mode for the rotation of vertical blinds.

The Quinetic Roller Shutter & Curtain Receiver controller has a 1.7A inductive load and supports WiFi 2.4Ghz and RF 433MHZ
to control roller shutters or curtains using Quinetic switches or Kinetic Switch APP.

Using the Kinetic Switch APP, it can be voice controlled and easily programmed for various mood scenes,
as well as having a timing function. Compatible with Amazon Alexa and Google Home.

Thanks to its limited dimensions, it can be mounted in the ceiling, wall or electrical socket box.

The Quinetic RF Transmitter is a device that sends an RF signal and wirelessly operates (ON/OFF) any Quinetic receiver
whenever voltage is applied to it.

It is extremely useful in situations where the target load is connected to a different circuit in a different part of the building/site.

The transmitter has two independent channels and works like a Quinetic switch, the difference between them being the capability of the transmitter to be triggered by external equipment rather than human manual operation.

After the RF transmitter is paired with the wireless receiver, it will send a wireless signal ON to the receiver when either of the S1/S2 live lines receives input signal. It will send an OFF signal to the wireless receiver when either of the S1/S2 input lines is disconnected.

Each RF transmitter can be paired with multiple wireless receivers.
It can be mounted in the ceiling, wall, electrical socket box, behind an electrical switch (N required), etc.

The Quinetic RF DALI Controller is a product that connects wired and wireless lighting control solutions. The power supply is provided by DALI bus and it outputs DALI signal. Users can control DALI devices more conveniently by pairing with wireless Quinetic switches.

QUDALIRF DALI controller allows 2 types of control - Group and Scene. There are two rotary switches on the controller that are used to set the starting group or scene number, a total of 16 states for each.

Up to 20 wireless Quinetic switches can be paired with the RF DALI Controller.

Thanks to its limited dimensions, it can be mounted in the ceiling, wall and electrical socket box.

Quinetic RF DALI Controller is a fusion of wired lighting solutions and wireless lighting control solutions, which can be applied in many scenarios such as: commercial offices, public buildings, etc. Compatible with the original wiring lighting control system, it has more flexibility, no wiring, quick installation time and effective energy saving.

The Quinetic wireless socket adaptor with a high-efficiency switching power supply has a wide
voltage range with excellent stability and durability.

A 13A relay. The Quinetic wireless socket adaptor is equipped with an in-rush
current suppression function, creating a safe and durable product.

Wireless Quinetic energy switch and wireless socket adaptor can be paired
with any combination: a controller can be controlled by a maximum of 10
separate switches, a switch can pair an unlimited number of controllers.

This latest Quinetic powered door bell (QUDB) allows you to add a simple plug in bell with multiple door bell pushes (QUBP/QUBPB) (up to ten), from anywhere, be it your front door; back door or side door etc.

There is no need for any wires or power to the bell pushes thus making this the simplest,
easiest to install and most versatile of bells.

With a range of 38 pleasant ring tones and 4 different volume settings you can even assign a different ring tone to different bell pushes, thus allowing you to know which direction your visitor is approaching from.

With built in micro-energy acquisition module, the Quinetic Bell Push Button doesn't require any battery.
With a built in micro-energy module, It converts mechanical energy pressed into electrical energy, activating the wireless signal transmission.

Communication mode is RF, thus no wires are required.

The doorbell has an in built memory function so will always memorise the last set music track and ring volume.

The QUGATE WiFi Smart Gateway works as a Control/Connection Hub allowing our other
non WiFi Quinetic products to go smart.
The Gateway acts as a conduit for any RF Quinetic products to be linked together thus creating a hybrid system for both RF and WiFi connectivity.

An added feature of the Gateway is its ability to act as a doorbell thus creating the perfect
WiFi doorbell solution for your domestic or commercial applications.
In addition, utilising the Gateway allows for connectivity via the TUYA APP thus enriching
your smart experience.

The Quinetic Gateway can be used in situations where the distance between a WiFi receiver
and the WiFi router is too far and the receiver cannot connect to the router.

A RF receiver can be used instead and paired with the gateway (controlling distance 40m indoor, 100m outdoor). With the help of the gateway, the RF device will become a smart device and can be controlled through WiFi from anywhere in the world or through voice control using Amazon Alexa or Google Home.

Quinetic Accessories