 4 inch ducting - ductable up to 9m.
Unique iris shutter, prevents back draughts
Three year 'no quibble' guarantee.
Also available soon are 12V DC low energy low watt, long life/SELV versions. Splashproof, tiling friendly, wipe clean cover.
Power consumption
30w max |
iCON30 Low Profile Fan 118m3/h - (32 l/sec)
White | | |
|
iCON 30 is ideal for toilets, en-suites, shower rooms, utility rooms and bathrooms.
Recessed into the wall or ceiling, it is stylish and unobtrusive, even in the smallest space.
Also supplied with a narrow contour 'skirt' for surface mounting if preferred.
The quiet, powerful axial fan has been designed with simplicity in mind.
Flow rate up to 32 l/sec (118 m3/hr). Ductable up to 9m.
A quick, core drilled hole enables immediate fixing of iCON 30.
The twist on/off cover requires only a single side entry fixing screw.
Cantilever fixing lugs enable recessed installation on uneven surfaces.
The 'snap-in' module is quick to fit and wire.
Tiling is a breeze with the circular cover flange, reducing the need to 'make good' and one wipe and the cover is clean.
Stylish, slim and unobtrusive in walls or ceilings.
Unique iris shutter, prevents back draughts, operates silently and helps reduce noise ingress.
Interchangeable control modules match fan to installation requirements.
Complies with latest Building Regulations (F1 ventilation). A comprehensive range of accessories.
The basic iCON 30 is supplied for remote switching. - No module required
To order an alternative method of control, just select from the modules below
PCM - Pull Cord - Manual on/off control by pull cord switch
TM - Timer - Adjustable timer 1 to 45 minutes. Remote or light switch operation
HTM - Humidity - Adjustable humidity setting 40% to 90% RH, adjustable timer and pull cord boost
PRTM - Infrared - Passive infrared activation with adjustable timer overrun
PRHTM - Infrared - Passive infrared activation with adjustable humidity setting and adjustable timer overrun
CVM30 - Fan runs continuously at low speed & the pull cord operates as a boost.
Don't forget to add the control module you want from the accessories menu below. Any module fits any far
| - Flush - Hole Size - 160mm - To accept motor body Then 110mm for ducting
- Surface - Hole Size - 110mm
- Fitted Dimensions
225mm x 43mm
| - Sound pressure dB(A)@3m: - 35dB
- Power (Watts): - 30w
|
|
|
|
