{xx
     
   
   
 
 
Installation - 2
2. If retro fit installation, remove existing ceiling rose wiring (as shown opposite) replace and re-wire with colour coded plug (opposite) to achieve wiring as shown below. For new build install the colour coded plug as wiring diagram shown below. Note: This unit must not be earthed, no connections are to be made to terminals or wires marked with the letter E, coloured green/yellow or an earth symbol

Warning:

This alarm is mains operated and should be installed in accordance with the published Regulations for Electrical Installations. If in any doubt consult a qualified electrician. Failure to install this alarm correctly may expose the user to shock or fire hazards.

Previous - Return to product - Next