- Pilot wire installations utilise an additional control wire linked between each heater. This is a 240V live conductor, carrying a low current signal to activate the various modes on the heater electronic control. Up to 20 heaters per zone can be supported (dependent on controller).
- This system is ideal for new build applications as the pilot wire can be installed with the first fix wiring. As heaters require no additional receivers, this offers a cost-effective means of central control.
| - To use the Wall programmer with pilot wire cables
- A single zone with up to 10 linked heaters
1 x DX RXPW1 Programmer per Installation
- 1 - 4 zones with linked heaters
1 x DX RXPW4 Programmer per Installation
- to run other items ( towel rail ) under the same controller
1 x DX RXPWIF for each additional item
|