Intumescent Downlight Cover - Fire hoods

Loading …

Intumescent Downlight Cover
60 minute fire rating
Downlighters in ceilings are widely used in commercial buildings. Each ceiling is subject to fire regulations and where applicable the ceiling construction needs to be fire rated.

However, once a hole has been made in the ceiling for a downlighter, the integrity of the construction and it's ability to perform in a fire can be reduced significantly. To combat this the ASTRO Downlighter Cover has been developed to cover maximum protection for holes created by he introduction of a downlighter and to allow for maximum ease of fitting.

In a fire situation the cover expands internally to fill all the available space with a highly insulating fire resistant char. Thus, the fire is unable to penetrate the hole and the cover is able to give additional insulation protection to the ceiling void to reduce the chance of heat build up and ignition of flammable materials such as accumulated dust and insulation.

  • Prevents fire from penetrating the ceiling void and retains ceiling's fire protection integrity
  • Covers a wide range of mains & low voltage downlighters
  • Ventilated to reduce heat build up
  • Installed in seconds
  • No screws, drilling or additional supported required
  • Maintenance free
  • Can be used in suspended, plasterboard or concrete ceilings
  • Lightweight & flexible cover can be fitted from below or above the ceiling
  • Once fitted downlighter can be fitted as normal
  • Provides a highly insulating stable char when exposed to fire
  • 60 minute fire rating
  • BS EN 1365-2:2000
  • BS476 Part 23:1987
  • Passed and certified at BRE to BS EN 1365-2 :200
    Test report no. CC 203791A.
  • Passed and certified at Chiltern International Fire to BS 476 Part 22 1987.
    Test report no. CHILT/A02166B
  • Passed and certified at Chiltern International Fire to BS 476 Part 23 1987.
    Test report no. FEA/F0006
  • Cover Selection
    FH DC150 for 50mm - 75mm downlight cutouts
    FH DC200 for 75mm - 100mm downlight cutouts
    FH DC250 for 100mm - 140mm downlight cutouts

Technical:

Spec and Information - pdf 950kb
  Order Code Description Price (ex VAT) Price (inc VAT) Quantity
product photo FH DC150 150mm x 150mm Intumescent Downlight Cover Special Offer

EACH

5+

£8.40

£8.40

EACH

5+

£10.08

£10.08

product photo FH DC250 250mm x 250mm Intumescent Downlight Cover

EACH

5+

£16.50

£16.00

EACH

5+

£19.80

£19.20

All Sold

Fire, Vapour & Thermal Seal Cap

Loading …

Fire, Vapour & Thermal Seal Cap
for Loft Void Protection

60 minute fire rating
Ideal for use with Loft Insulation
See product for Accessories

Technical:

Information - 87kb pdf Specification - 200kf pdf
  Order Code Description Price (ex VAT) Price (inc VAT) Quantity
product photo TL ALC274 Fire Vapour & Thermal Seal Loft Cap

EACH

3+

£10.90

£10.25

EACH

3+

£13.08

£12.30

All Sold