Kewstick Duo - Non-contact Dual Sensitivity Voltage Indication
Loading …
Kewtech
Kewstick Duo
Non-contact Dual Sensitivity Voltage Indication
Kewstick Duo
Non-contact Dual Sensitivity Voltage Indication
Unlike standard voltage indicators the KEWSTICK DUO has two sensitivity ranges depending on your requirement…
1. Wide ranging voltage indication to detect the presence of voltage between 50-600V without the need for metal contact.
2. Hold down the attenuation button and the KEWSTICK DUO’s sensitivity is reduced to enable you to indicate between live and dead cables just millimetres apart!
1. Wide ranging voltage indication to detect the presence of voltage between 50-600V without the need for metal contact.
2. Hold down the attenuation button and the KEWSTICK DUO’s sensitivity is reduced to enable you to indicate between live and dead cables just millimetres apart!
- Requires no metal contact
- Two sensitivity levels
- Enables indication between live and dead cables millimetres apart
- Pocket sized
- CAT IV rated
- Lower power consumption circuits means long battery life
- Clearly detects between 50-600V AC without metal contact
- Two colour LEDs - Green for correct working and Red for voltage detection
- Two tone buzzer, one for correct working and one for voltage detection
- On/Off button for longer battery life
Technical:KTKSDUO Datasheet - 80kb pdf |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
Single Pole Contact Voltage Detector
Loading …
Kewtech
Single Pole Contact Voltage Detector
Single Pole Contact Voltage Detector
The KT1700 is your first level of protection against electrical shock when approaching metal enclosures / potentially live metal work.
Make contact with earth metallic parts such as the externals of a distribution board, water or earth bonding pipes before carrying out safe isolation or putting yourself in harms way for a first indication of any voltage or potential issue.
Make contact with earth metallic parts such as the externals of a distribution board, water or earth bonding pipes before carrying out safe isolation or putting yourself in harms way for a first indication of any voltage or potential issue.
- Voltage measurement range 50–600V AC
- Safe live phase detection
- KT1700 is fully functional even when wearing full PPE
- Flashing red front section plus audible warning indicates greater than 50V AC is present
- Slow flashing blue LED with single beep indicates that the KT1700 electronics are working correctly
- Robust construction with IP54 water and dust ingress rating
- Probe tip conforms to HSE recommendations GS38
- Meets international safety standard BSEN61010-1:2010
Technical:KTKT1700 Datasheet - 130kb pdf KTKT1700 Instructions - 750kb pdf |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
