Intelligent Auto-Adjusting Fan
Learns from its environment and automatically adapts fan speed based on presence detection
and humidity levels - no user input required.

Plug & Play Simplicity
Two-wire connection (L/N), factory pre-set for hassle-free installation and use.
Ideal for installers and end users alike.

Multiple Detection Modes:
- Presence detected
- Sudden humidity rise
- Gradual humidity change
- Idle mode when neither is detected
Result: tailored ventilation at the lowest possible energy cost

IPX4 Rated for Bathroom Zone 1
Fully compliant with UK regulations for safe use in high-moisture environments.

Range of axial extractors with airflow rates of approx. 80 m3/h,
for connection to 100 mm diameter circular ducting.
Motor mounted on silent-elastic-blocks which absorb noise and vibration
and create a very low noise level.

All the fans are manufactured from injection moulded plastic, fitted with automatic shutter
and energy-saving motor equipped with overload thermal protection.
All the fans are class II insulation, IP45 rated and suitable to operate with air temperature up to 40oC.
Ball race bearings ensure long life at any mounting angle.

Single-Room Heat Recovery
Compact, decentralised solution ideal for domestic or commercial spaces where centralised systems aren't practical.

Up to 93% Heat Recovery Efficiency
Equipped with a ceramic heat exchanger, offering high thermal efficiency for maximum energy savings.

Stylish and Discreet Design
Sleek internal panel blends seamlessly into any environment.

Effortless Maintenance
Includes washable filters (G3 at both ends) and does not require defrosting.

Quiet Operation
Low noise levels even at maximum speed – as low as 19 dB(A) at low speed on 100 model.