Luxomat Wall PIR Occupancy Switch - 2 Wire400752992615292716

Loading …

Length: 86mm.
Width: 86mm.
Depth: 44mm.

(Assuming the unit is switched OFF, 230VAC is present and battery is charged).
Once the set twilight level is reached (=dark), the Indoor 180 will react only to detected movements and turn ON the relay, thus illuminating the room, until no further movements or sounds are detected and the internal timer elapses.

Once switched ON, each detected movement and/or sound will restart the timer interval thus prolonging the ON-period.

Once the relay is switched OFF, the acoustic sensor remains active for another 8-10sec, to allow the relay to be re-triggered by sounds or noises into ON state within this period.
Wall Mount PIR Occupancy Switch
2300w - 2 Wire
The LUXOMAT® Indoor 180R/2W occupancy detector designed for flush mounting indoor applications

No Neutral wire is needed

The 180 utilizes infra red and acoustic sensing technology
to detect the presence and movement of persons
It contains a twilight (lux) sensor a microphone and a timer

The LUXOMAT® Indoor 180 is an automatic switching device
which operates on the principle of infrared technology.
It continuously measures the ambient temperature and the ambient light level and compares it
with the infrared radiation emitted from any moving form which enters its detection zone.
Any differential results in automatic switching, provided the light level is beyond a preset light level.

Contrary to other motion detectors which reacts to moving heat sources only,
with the LUXOMAT® Indoor 180 you will not be left in the dark unless there is no more motion
because through a combination with an acoustic sensor it reacts additionally to noises.

Acoustic function
As long as the acoustic sensor receives noises e.g.
by speech or music the LUXOMAT® Indoor 180 remains switched-on
even when there are no more motions – the light stays on.
Every noise and every motion retriggers the unit again for the period of pre selected time.
Unless there is no more motion and no more noise the LUXOMAT® Indoor 180 switches the light off automatically.

Application examples:
Monitoring of public lavatories, corridors, archive rooms, conference rooms, etc.
  • The sensor contains 2 red LEDs:
    LED 1 for indication of movements (in normal operation) lux-level (in TEST mode) LOW BATTERY/2hr charging status
    LED 2 for sound indication
  • Light sensor, acoustic sensitivity and time are adjustable
  • Installation either at the side of the door or above in a fixing height between 1.10m and 2.20m
  • The 180R2W requires a permanent live supply, and should only be used in applications where the lights would not be on for more than 12 hours per day.
  • This is to allow its rechargeable battery enough time to recharge itself from the mains supply.
  • The detection area can be altered by using the included blinds at the bottom of the detector.


BE180R2W Instructions - 337kb .pdf
Product Code
Price (ex VAT)
Price (inc VAT)
product photo
BE 180R2W

Luxomat Wall PIR Occupancy Switch - 2 Wire