c/w Door Release Buttons and Mag Lock
Weatherproof access control Keypad
EZ-LOCK is an IP55 rated weatherproof access control keypad. Its slim line modern aesthetics
and durable construction make it a perfect addition to any access control system.
Users approach the keypad and enter a four digit code to activate one of the EZ-LOCKs on board relays.
These relays are used to carry power from a 12vdc power supply to an appropriate door release.
The EZ-LOCK can be used to operate two separate electronic locks .
In addition 2 user groups can be setup allowing specific area access.
EZ-LOCK can also be used as a door bell for visitors.
Programming the system is kept as simple as possible, all functions are carried out at the keypad itself,
the unit is totally self-contained, no PC or laptop required.
EZ-LOCK can be installed as a new stand-alone access control system simply by adding a 12vdc power supply and suitable door release
or it can be used to upgrade an existing system to allow entry of pre-authorised visitors such as staff without bothering reception.
In this case the power supply and door release of the existing system is usually suitable for use with the EZ-LOCK.
Weatherproof IP55 rated
- Durable metal construction
- Backlit blue led keypad
- Activation notification led
- 2 relay outputs
- 2 user groups
- Doorbell function
- Self-contained programming
Supplied with 12v 2amp Power Supply
- Electro Magnetic Lock - Single door
- Holding force - 250KG
- " LZ " bracket is Supplied
An " LZ " bracket is required on most inward opening doors
No bracket is normally required if the door opens outward .... quite rare
- Voltage 12VDC
- Current 420ma
- Weight 1.86kG