9.6kW Instant Inline Water Heater - Thermostatic
This thermostatically controlled instantaneous water heater
is suitable for hand washing at up to 2 basins,
or for a single light shower, or light dishwashing at a single sink.
Confirm that the flow rate and temperature performance is adequate
for your application using the chart and tables provided.
for suitable taps see related products below
Supplies hot water to one or two outlets depending on application
- Bare wire heating system gives fast heat up time
- Heats the water instantly as it flows through the unit
- Energy efficient no standing heat losses
- Energy saving only uses the power required to deliver the chosen temperature
- External electronic thermostatic control accurate to the nearest degree
- 9.6 kW power rating
- Slimline design
- Heating power adjusted electronically to compensate for temperature, flow rate and water pressure variations
- LED temperature display
- Temperature factory set at 38°C and can be adjusted by the user between 30°C and 60°C
- One programmable memory setting
- After power off/on the unit will recall the last usage outlet temperature
Control Screen (from left to right)
Temperature display (°C).
- Actual flow rate display (l/m)
- Heating power display (%)
- Memory save selected temperature.
- Touch screen arrow keys allow the user to set the required temperature.
- Touch screen power on/off control.
- The temperature display will flash if the set temperature cannot be reached.
- Flow Dial
Increase/decrease maximum water flow rate.
Overheat temperature protection 75°C (manual reset).
- Suitable for use with spray head taps with removable M22/M24 nozzles taps available separately