Lets users identify which fuse / MCB controls which circuit with a ‘self learning’ mode, enabling accurate location of fuses.

The Kewtech Fuse Finder consists of a transmitter and receiver with mains lead for socket outlets.

Transmitter
Connects to the circuit to be traced by either the mains lead or fused test lead set. The transmitter is powered from the supply so does not need batteries. It injects a signal into the circuit that is then picked up by the receiver at the fuse board.

Receiver
This cleverly auto-tunes when scanning a bank of fuses / MCBs. At least two scans are required so that the receiver can adjust its sensitivity to detect the strongest signal and hence the correct fuse for the circuit under test.

ACC016E test leads are optional for testing lighting circuits.