A traditional junction box requires a lot of work. Live, Neutral, Earth and Switch Live need to be separated and individually manipulated into the correct terminals, then screwed down to fix into place. Mistakes can be made, and the limited space inside makes it difficult to get the wires where they need to go. This is where the Quickwire prewired maintenance free junction box comes in.

The simplicity of Quickwire means that it can be installed in a matter of seconds.
Each of the 4 cables simply needs to be pushed into the correct inlet, until you hear a click. Then you’re done!

The Quickwire Switch & Load allows for two power connections, one switch connection and one load connection.

Use the first power inlet to connect power to your circuit. Plug-in your luminaire and switch cable to complete your circuit.
Each cable inlet is prewired and labelled for quick and simple identification.

To take power on to a new circuit/room simply connect another Switch and Load using the second power inlet.
If you want to connect multiple luminaires you can use a Quickwire Splitter.