Martindale EasyPAT2100 - PAT Tester5036162184482E-PAT2100

Loading …

CASE
Size: 330 x 263 x 144mm
Material: ABS
Weight: 5.1kg nominal

Description

Martindale EasyPAT2100
PAT Tester

Does all mandatory tests and more

Run test (Actually runs the appliance)
Earth leakage test
100mA test for computers etc
Flash test @ 1500 & 3000 volts particularly for repairers
Flash testing is not a mandatory requirement for many situations and special safety procedures should be observed when carrying out this test
Will work on either 110v or 230v supply
Built in extension lead tester
Manual recording of results

Supplied with certificate of conformity -
Calibration certificate required after 12 months of purchase

SUPPLY
Voltage: 110V/240V ±10% 50/60Hz
Power Consumption: 10/220V A (excluding run)
EARTH CONTINUITY TEST (8A)
Test Voltage: 6V a.c. nominal with no load
Test Current: 8A a.c. nom @ 0.1O. 5A a.c. nom@0.5O
Range: 0-1.99O
Accuracy: ±10% of reading ±2 digits
EARTH CONTINUITY TEST (25A)
Test Voltage: 6V a.c. nominal with no load
Test Current: 25A a.c. nom @ 0.1O. 10A a.c. nom @ 0.5O
Range: 0-1.99O
Accuracy: ±10% of reading ±2 digits
EARTH SCREEN TEST (100mA)
Test Voltage: 130mV d.c. nominal open circuit
Test Current: 100mA d.c. nominal constant current
Range: 0-1.99O
Accuracy: ±10% of reading ±1 digit
INSULATION TEST
Test Voltage: 500V d.c., -0%, +20%, at 2MO and 7MO
Short Circuit Current: 1mA d.c. nominal
Display Range: 0-19.9MO
Accuracy of Indication: ±5% of reading ±1 digit
RUN CURRENT TEST
Range: 0-19.9A
Accuracy: ±10% of reading ±1 digit
EARTH LEAKAGE TEST
Range: 0 - 19.9mA
Accuracy: ±10% of reading ±1 digit

FLASH TEST
Test Voltage: 1.5kV a.c. - Class I. 3.0kV a.c. - Class II
Display Range:0-19.9mA a.c.
Usable Range:0-3mA a.c. (current trip @ 4mA nominal) (short circuit current 5mA nominal)
Accuracy: ±5% of reading ±1 digit
LEADS
Mains: 1.5 metre fixed lead with a 13A moulded plug.
Earth Continuity: 1.5 metre long, detachable lead with a heavy duty, shrouded crocodile clip.
Flash Gun: A safety gun, giving extra user protection for flash testing.
Compatible with the EasyPAT and MicroPAT. 4mm socket.
110/240V Adaptor: 110V 16A plug (BS4343) to 240V 13A free socket (BS1363)
SOCKETS
Mains: 240V 13A to BS1363. 110V 16A to BS4343.
Flash: 4mm high voltage safety socket
LAMPS
Flash: Neon lamp which illuminates when flash test is active.
Over Temperature: Red LED which illuminates when the temperature limit of the instrument is exceeded.
FUSES
Front Panel: 16A (FF), 1.25”, HBC, ceramic
Plug: 13A, 1”, HBC, ceramic
Internal: 3.15A (F), 5 x 20mm, HBC, ceramic
DISPLAY
LCD: 0.7" high, 2½ digit LCD with annunciations to indicates supply voltage of the mains and units of measurement in use.
TEMPERATURE
Operating: 0° to +35°C
Storage: -10° to +50°C