***Use Code VL WG1 + 1 X VL MTR1000
Product Code: VL GP1001
5021575542431
IGP1001
Loading …
Minimum Load - 40 watts
1 Gang 2 Way 1000w iQ
Mains & Low Voltage Dimmer Switch - Brass
Mains & Low Voltage Dimmer Switch - Brass
These “IQ” dimmers are microprocessor controlled and benefit form the following features:
They fully comply with European safety legislation (BSEN 60669-2-1)
and handle overload situations by stepping down its output to the lamps until the load is reduced.
These dimmers are suitable for all applications requiring a leading edge dimmer.
The output from the dimmer switch is extremely gentle on the load and they are soft-start, thus extending lamp life considerably.
These dimmer switches are suitable for many types of load (subject to lamp/transformer manufacturers guidelines).
They can be used for:
Incandescent GLS lamps
12V Dichroic lamps (best with Telco premium low voltage transformers)
Mains Halogen lamps (GU10 etc)
Varilight dimmable low-energy CFL lamps
Wire-wound transformers
One dimmer for either mains or low voltage transformer loads
- Soft start to extend lamp life Saves energy
- Steps down output under partial overload,
- Switches off under gross overload, protecting components and extending product life.
- Normal operation resumes once load is corrected.
- iQ intelligent control of awkward loads
- Push-on / Push-off 2 Way switching
- Specifically for use on the primary circuit of low voltage lighting transformers.
- Any combination of transformers up to the maximum rating may be connected
Minimum Load - 40 watts
Technical:Dimmer Selection Guide .PDF (200kb) FAQ - Trouble Shooting |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
|
VL GP1001
***Use Code VL WG1 + 1 X VL MTR1000 |
Accessories, Boxes and Grommets
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
