***Use Code VL WY1CU + 1 x VL MIP1000
Product Code: VL IYP1001CU
5021575966978
IYP1001.CU
Loading …
Minimum Load - 40 watts
1 Gang 1000w 2 Way
V-PLUS iQ Mains & LV Dimmer Switch
Copper
V-PLUS iQ Mains & LV Dimmer Switch
Copper
IQ INTELLIGENT DIMMER SWITCHES
These “IQ” dimmers are microprocessor controlled and benefit form the following features:
They fully comply with European safety legislation (BSEN 60669-2-1)
and handle overload situations by stepping down its output to the lamps until the load is reduced.
These dimmers are suitable for all applications requiring a leading edge dimmer.
The output from the dimmer switch is extremely gentle on the load and they are soft-start, thus extending lamp life considerably.
These dimmer switches are suitable for many types of load (subject to lamp/transformer manufacturers guidelines).
They can be used for:
Incandescent GLS lamps
12V Dichroic lamps (best with Telco premium low voltage transformers)
Mains Halogen lamps (GU10 etc)
Varilight dimmable low-energy CFL lamps
Wire-wound transformers
One dimmer for either mains or low voltage transformer loads
"The finest 304 stainless steel as a base product, then electro polishing to attain a perfect mirror finish.
The plates are then nickel plated and finally copper plated to a flawless finish.
Electrophoretic lacquer encapsulates the entire plate for total protection."
These “IQ” dimmers are microprocessor controlled and benefit form the following features:
They fully comply with European safety legislation (BSEN 60669-2-1)
and handle overload situations by stepping down its output to the lamps until the load is reduced.
These dimmers are suitable for all applications requiring a leading edge dimmer.
The output from the dimmer switch is extremely gentle on the load and they are soft-start, thus extending lamp life considerably.
These dimmer switches are suitable for many types of load (subject to lamp/transformer manufacturers guidelines).
They can be used for:
Incandescent GLS lamps
12V Dichroic lamps (best with Telco premium low voltage transformers)
Mains Halogen lamps (GU10 etc)
Varilight dimmable low-energy CFL lamps
Wire-wound transformers
One dimmer for either mains or low voltage transformer loads
"The finest 304 stainless steel as a base product, then electro polishing to attain a perfect mirror finish.
The plates are then nickel plated and finally copper plated to a flawless finish.
Electrophoretic lacquer encapsulates the entire plate for total protection."
- Soft start to extend lamp life Saves energy
- Steps down output under partial overload,
- Switches off under gross overload, protecting components and extending product life.
- Normal operation resumes once load is corrected.
- iQ intelligent control of awkward loads
- Push-on / Push-off 2 Way switching
- Specifically for use on the primary circuit of low voltage lighting transformers.
- Any combination of transformers up to the maximum rating may be connected
Minimum Load - 40 watts
Technical:Dimmer Selection Guide .PDF (200kb) Dimmer Instructions - pdf 28kb FAQ - Trouble Shooting |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
|
VL IYP1001CU
***Use Code VL WY1CU + 1 x VL MIP1000 |
Accessories, Boxes and Grommets
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
