1 Gang 2 way V-COM LED Dimmer Switch 1 x 100w - Copper5021575966930KYP101.CU
WARNING: Do not apply products with metal faceplates directly to freshly plastered or damp surfaces as product may tarnish. If in doubt, use polythene as a temporary gasket to protect the product. Do not use masking tape on this product.
1 Gang 2 way V-COM LED Dimmer Switch 1 x 100w Copper
V-Com is suitable for 1-10 LED lamps (Max load 100w) per gang.
"The finest 304 stainless steel as a base product, then electro polishing to attain a perfect mirror finish. The plates are then nickel plated and finally copper plated to a flawless finish. Electrophoretic lacquer encapsulates the entire plate for total protection."
Great value LED dimming
Patented V-Com intelligent LED dimming technology
Suitable for loads from 1 to 10 LED lamps or 100W maximum.
Min Wattage: Zero
Soft start to improve lamp life
Adjustable minimum and maximum brightness
Intelligent overload protection
DRIVE function to enable initial start-up at low brightness settings
Choice of driving modes to optimize the dimming performance of any given LED lighting load.