1-10v 2W Dimmer Module (replace a Std Dimmer)
for Multiple Ballasts/Drivers
This dimmerswitch is designed for high frequency
dimmable ballasts that require a 0–10V or 1–10V control signal.
This dimmerswitch is designed to work with one or
multiple dimmable ballasts up to 20mA.
The mains switch is rated at 250V a.c. 6A maximum.
Do not use this dimmerswitch for any other purpose.
The dimmerswitch will be damaged if used for these applications.
Do not connect the 1–10V control terminals to the
mains. Incorrect use will make your guarantee invalid.