The New 3000 Series Full Circle Protection

Intelligent Simplicity
The new 3000 Series provides whole property coverage from one series.
This technologically advanced series detects both Fire and Carbon Monoxide (CO), ensuring your whole property is protected.

The Ei3014 Heat Alarm contains a high performance thermistor to provide protection from fire.
The thermistor has a smaller thermal mass enabling it to give faster alarm responses when the trigger temperature of 58°C is reached.
The alarm is best for detecting heat build-up from large flaming fires.

The Ei3024 Multi Sensor Fire Alarm is built on the same high quality, reliable and proven technology that all Aico Alarms are renowned for, but contains the latest high-tech enhancements making it the most effective domestic fire alarm on the market.

The alarm contains our tried and tested thermistor heat sensor and our proven electrochemical CO sensor, providing protection from both Fire and CO.

The Ei3028 Heat & CO Alarm is built with the same high quality, reliable and
proven technology as in our other Heat and CO alarms but combined in one
alarm and with advanced intelligent technology.

The Ei3030 Fire & Carbon Monoxide Multi- Sensor Alarm is the latest edition to the technologically advanced 3000 Series.

Combining Optical, Heat and CO Sensors for the ultimate Fire and CO response, while maintaining the simplicity that installers love.

The Ei1529RC is used to control all the alarms in a system from one place.

Aico highly recommend fitting a control switch if you have smoke, heat and carbon monoxide alarms on the same system as it’s essential that you can tell which alarm has sounded. From here you can identify which danger is present and the action you should take.

Test, Locate and Silence
This mains powered accessory increases the flexibility and user friendliness of the alarms by allowing the user
to remotely Test, Locate and Silence alarms in the system:

Test – The alarm system
Locate – The alarm that has been activated
Silence– Any nuisance alarms

The Ei128R is a mains powered Relay Module that triggers external devices,
such as a strobe light or telecare device, if the alarms in the property activate.

The Relay is designed to operate whilst the alarm system is sounding, to signal ancillary devices such as door closers, extractors, remote sounders etc. When any of the interconnected alarms sound the signal will cause the relay contacts to switch.

Compatible with the 3000, Ei2110e Multi-Sensor Fire Alarm, 160e Series alarms and the 140e Series.

The Ei129 Switched Input Module will trigger interconnected alarms if an external device is activated, such as a sprinkler system.

It is mains powered with rechargeable lithium back-up and is compatible with 3000, 2110e, 160e and 140RC Series alarms by mounting directly underneath. The fire/sprinkler system is then simply wired through the Ei129 to link to all connected alarms.

n.b. Only one Ei129 is required per alarm system, as long as all alarms are interconnected.