Locate and Remote Control Test Switch Surface - 1529RC3
Product Code: EI 1529RC
5099383004274
EI1529RC
Loading …
90mm x 90 x 40mm
What Ei Fire and Carbon Monoxide Alarm Should You Buy?Ei1529RC
Locate and Remote Control
Test Switch - Surface
Locate and Remote Control
Test Switch - Surface
The Ei1529RC is used to control all the alarms in a system from one place.
Aico highly recommend fitting a control switch if you have smoke, heat and carbon monoxide alarms on the same system as it’s essential that you can tell which alarm has sounded. From here you can identify which danger is present and the action you should take.
Test, Locate and Silence
This mains powered accessory increases the flexibility and user friendliness of the alarms by allowing the user
to remotely Test, Locate and Silence alarms in the system:
Test – The alarm system
Locate – The alarm that has been activated
Silence– Any nuisance alarms
Aico highly recommend fitting a control switch if you have smoke, heat and carbon monoxide alarms on the same system as it’s essential that you can tell which alarm has sounded. From here you can identify which danger is present and the action you should take.
Test, Locate and Silence
This mains powered accessory increases the flexibility and user friendliness of the alarms by allowing the user
to remotely Test, Locate and Silence alarms in the system:
Test – The alarm system
Locate – The alarm that has been activated
Silence– Any nuisance alarms
- Suitable for siting at any convenient point in the property. Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms
- The unit incorporates 3 switches marked ‘Locate’, ‘Test’ and ‘Hush’
- Easily installed via a 3 wire connection of Live, Neutral and Interconnect/Control (as standard smoke/heat alarm wiring)
- Wall mounted for ease of use – can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied)
- Complies with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive)
- Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives
90mm x 90 x 40mm
What Ei Fire and Carbon Monoxide Alarm Should You Buy?
Technical:Ei1529RC Datasheet - 190kb pdf Ei1529RC Instructions - 230kb pdfWarranty:Aico |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
|
EI 1529RC
Locate and Remote Control Test Switch Surface - 1529RC3 |
Boxes and Grommets
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
