V-Dim is best suited for Incandescent GLS filament lamps.
It is NOT suitable for LED or Fluorescent Lighting loads.

For other V-DIM dimmers, including 3 & 4 gang see our Matrix kits below.
The Matrix kits allow you to purchase dimmer plates and modules separately,
enabling you to combine different dimmers on one dimmer plate.

For other V-COM dimmers, including 3 & 4 gang see our Matrix kits below.
The Matrix kits allow you to purchase dimmer plates and modules separately,
enabling you to combine different dimmers on one dimmer plate.

Professional Trailing-Edge Dimmers (V-Pro).
Our most versatile dimmer switch.
High quality UK design and manufacture.
Trailing edge for smooth, totally silent dimming.
Intelligent detection of the lamp type for adaptive control of most loads.
Overload protection. Superb performance with most dimmable LED lamps.
Soft start and gentle waveform to considerably extend lamp life

The Matrix kits allow you to purchase dimmer plates and modules separately,
enabling you to combine different dimmers on one dimmer plate.

c/w Matching Knob(s), Plate Screws, Fixing Nut(s) and Non Metalic Fixing Tool.
Add dimmer modules and switches (see below).

Quick and easy to assemble.

Full dimming control from every dimmer location.

Traditional rotary style dimming with multi-position switching when used with supplementary slave controllers.

Professional Trailing-Edge Dimmers (V-Pro).
Our most versatile dimmer switch.
High quality UK design and manufacture.
Trailing edge for smooth, totally silent dimming.
Intelligent detection of the lamp type for adaptive control of most loads.
Overload protection. Superb performance with most dimmable LED lamps.
Soft start and gentle waveform to considerably extend lamp life

V-PRO Multipoint - (Formally known as Eclique2)

Tactile Touch and remote controlled dimmers, which are suitable for 0 - 100W of dimmable LED lighting (1 - 10 LEDs).

You can dim the lights using touch control or using a remote control handset (sold separately).
To access the scene-setting features of these dimmers choose the LightScene handset (YRE8).

Not suitable for LEDs requiring triac dimming control.

The new rectangular rocker touch pad allows you to have more control over the dimming cycle, while having a classic light switch design. Pressing anywhere on the touch pad will turn on/off, and pressing and holding the top will dim up and the bottom will dim down

V-Pro dimmers are programmable to offer a choice of dimming modes.
In addition, users can set the minimum load level for the dimmer
to optimise the dimming range of a particular lighting load.

Dimming Slave for V-PRO Multi-Point (Formally known as Eclique2)

Any number of slave units can be used with V-PRO Multi-Point dimmer to allow 2 way and intermediate dimming and switching, so that the lights can be dimmed from more than one location.

Please Note: V-Pro Multipoint slave units are not dimmer switches
and cannot be used on their own without a V-Pro Multipoint dimmer.