Name: 30 Mtr Pack of Self Regulating Pipe Heat Tape c/w 13amp Plug
Brand: BN Thermic
SKU: BNPW30
Price: 143.52 GBP
Availability: InStock

30 Mtr Pack of Self Regulating Pipe Heat Tape c/w 13amp Plug

Product Code: BN PW30

5060002016305

PW-30

Loading …

SPECIFICATION

Supply
230 volt

List Number
BN PW30

Load
337 Watts

Heated Length
30 Mts

EACH
£119.60

EACH
£143.52

Quantity

Description

30 Mtr Pack of Self Regulating Pipe Heat Tape
c/w 13amp Plug

Prevents water from freezing in metal and plastic pipes

The PW’s built-in thermostat means that no additional control device is required.

The PW Frost Protection Heat Tape is designed for use
for the positive protection of hot and cold water pipes that may be subject to freezing conditions.

This can be used in flats, houses, mobile homes, farms, sports pavilions,
both for water supply and fire protection sprinkler systems.

The simple self contained nature of the PW lends itself to use for the
protection of single pipes such as in domestic lofts or gardens, for use with condensing boilers and widely used on mobile homes.

It is also ideal where many identical pipes require to be protected ie. In blocks of flats or sprinkler networks.

FEATURES
Pre-terminated with 1.5m cold lead and UK 3 pin plug
Built-in thermostat automatically energises the cable when pipe temperature falls below 3°C
Profiled thermostat base ensures excellent heat transfer from pipe
Fully moisture proof.
No special tools or skills required.
Fully moisture proof.
Pre-terminated with 1.5m cold lead and UK 3-pin plug
Economical to operate.
PW has profiled thermostat to fit snuggly to curvature of pipe rather than a flat based thermostat
PW can be installed in a gentle evenly spaced helix or in a straight line

Assuming a minimum ambient temperature of -15°C and 20mm thick insulation a PW heating cable can be installed in a straight line along pipes up to 50mm diameter
Always select the shortest suitable cable from the PW range
Where the cable is longer than the pipe it is protecting wind the cable in a gentle, evenly spaced helix
Secure the cable to the pipe at 300mm intervals using Insulation tape
The entire installation including the thermostat should be covered with a maximum of 20mm thick flame retardant insulation
Ensure that the thermostat is positioned at the coldest end of the pipe
Plastic pipes should be wrapped in AL50 aluminium tape before installing the cable
When used with pipes that may be empty, the cable should be covered in a layer of TLAL50 aluminium tape before the installation is applied.
A typical example would be when used with a condensing boiler
PW cables must not be exposed to temperatures in excess of 66°C
PFL warning labels should be applied to the outside of the insulation.

SPECIFICATION

Supply
230 volt

List Number
BN PW30

Load
337 Watts

Heated Length
30 Mts

Technical

Technical:

Instructions 45kb pdf PW Datasheet

Product Code

Description

Quantity