This Jupiter ceiling cooker hood is unique in every dimension. The size of this ceiling extractor is 120cm x 50cm, it can be used in a number of installation ways, either have the ceiling hood flush into your ceiling, or have it surface mounted by simply ordering the optional extra drop down box section to suit. You can also recirculate this hood using a recirculating frame. This is a simple bolt on to the drop down box

The Jupiter ceiling extractor can be ducted to the outside or re-circulated back into the room using the optional re-circulating frame that is simply attached to the top of the drop down box, allowing the air to flow back into the room, you will need to order the charcoal filters to purify the air if you are using this in re-circulation mode. This box and recirculating frame are hand finished steel painted white to blend with your ceiling and the rest of the hood.
The outer ring is black glass and the inner glass panel is lit with 4x LED lights, this unit is fully remote control operated with filter alarm. The metal grease filters are accessible by pulling down the centre glass panel, you can then simply place the washable metal filters in your dishwasher.

This hood must be installed on minimum 6" / 150mm round ducting or rectangular equivalent. Our equivalent ducting is 180mm x 95mm. This will allow for the highest extraction rate possible for the hood and aid in reducing noise from the motor. This hood must not be installed higher than 2 meters above your hob.