5+5 Way Twin RCD Split Load Consumer Unit c/w 100A + 2 x 63A RCD
Product Code: HG VC755H1
VC755H1
Loading …
Width 380mm
Height 245mm
Depth 105mm
Weight 2.75kg
hager
5+5 Way Twin RCD Split Load c/w 100A + 2 x 63A RCD
5+5 Way Twin RCD Split Load c/w 100A + 2 x 63A RCD
form have been designed to complement and integrate into its surroundings.
The VC755H1 10 way consumer unit is supplied complete with 2 x 63A 30ma RCDs and a 100A Main Switch isolator.
Uses a fixed busbar configuration with 5 ways on each of the RCD protected circuits.
Provided with multiple cable entries / knockouts on the top, bottom and rear of the unit.
- 1 x 100 Amp DP Main switch controls the entire board and allows for up to 5 x RCBO's or MCB's circuits.
- 2 x 63 Amp 30mA RCD allowing form RCD circuits to be split around a building.
- Max No of MCB's or RCBO's = 10.
- Dual 63Amp 30mA RCD Protection.
- Allows 100% RCD Protection.
- Main Switch controls all circuits.
- Second RCD for 2nd Group of Circuits.
- Easy and fast unit to fit.
- Largest amount of cabling space and in all the right places.
- Easy to remove cable entries safely.
- Top wall removes and reseals to IP4X.
- Fewer tools required to fit.
- Integrated spirit level allows for simple levelling.
Width 380mm
Height 245mm
Depth 105mm
Weight 2.75kg
Technical:17th Edition Consumer Unit Guide - pdf 1.8Mb Installation - pdf 480kb |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
|
HG VC755H1
5+5 Way Twin RCD Split Load Consumer Unit c/w 100A + 2 x 63A RCD |
Std MCBs for Hager boards
Loading …
See product for Accessories
Hager MCB's ( Type B )
6KA
6KA
Hager MCB's detect overcurrents due to both overload and fault currents.
The MCB will operate and interrupt the supply to prevent damage to the installation.
| See product for Accessories |
Technical:MCB Selection |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
Hager - RCBOs
Loading …
See product for Accessories
Hager - RCBOs
30mA sensitivity combined
MCB/RCD.
An RCBO is a combination of an MCB and RCD
This enables both overcurrent protection and earth fault current protection by a single unit.
Single module RCBOs may be installed anywhere along the length of the busbar and will occupy one outgoing way.
They are suitable also for installation in Consumer Units and in two or four module enclosures.
The current carrying capacity of the cable should always exceed the current rating of the MCB.
MCB rating 6A type ‘B’ characteristics
With flying neutral lead for connecting to neutral terminal of switchboard or consumer unit
| See product for Accessories |
Technical:Datasheet - 150kb pdf |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
Accessories
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|