The CK T1260 is an automatic stripper for PVC-insulated flat twin and earth cables which removes both the external sheathing and internal conductor insulation and features a built-in wire bending hole for effective termination of conductors up to 2.5 mm².

This wire stripper includes exchangeable blades and has a black colour finish.

The NEW C.K Automatic Wire Stripper Pro has a unique, two component contoured handle for comfort and secure grip.

Automatic single action stripping of wires without adjustment - for copper/aluminium wire 0.05 - 8.5mm.

Suitable for flat and round cables.

For CAT5e, CAT6, CAT6A, UTP, FTP and RG Type Co Axial cables

Cutting blade helps reduce distortion to inner cordage construction.
Helps reduce distortion to the inner cable construction i.e. Foil,
Braid, separators, inner cores, insulators and dielectric etc.
Also bonus single core stripping function.

The Cyclops takes the guesswork out of removing the cable jackets from many types of twisted pair (UTP & STP),
multicore (shielded and unshielded) and fibre optic cables.

This multipurpose tool automatically adapts itself to accept cable diameters of up to 11mm (0.43").
It is designed for long blade life and to cut into the insulation while leaving the conductors undamaged. It can be used for voice, video, audio, security and many other cable applications.

Ready to use straight from the box with no adjustments ever being needed, ensuring a reliable, consistent cut.

Quick and precise stripping of solar, security and energy cables from 1.5 - 16mm² (16-6 AWG).

Easy to handle thanks to the four-chamber system with clear assignment (1.5mm² / 2.5 mm² / 4 mm² + 6mm²/ 10mm² + 16mm²).

Professional cable stripper with two joint blades: the first is used to cut the sheath, and the second to cut the dielectric.

Used to cut a coaxial cable or a data cable in a single step.

Equipped with an indicator for cable diameter (Ø4.3mm to 7mm) and an adjustment wrench;
it is also suitable for both PVC and PE sheaths.

Single motion stripping of wires/insulation and the crimping of insulated and non - insulated terminals.

Carbon steel blades, alloy steel jaws hardened and tempered, with plastic hand grips

It is well known that working with SWA can be time consuming and laborious. Cutting steel wire with a sharp hacksaw is not easy and getting that final result perfectly straight, right round the circumference of the cable, can be even more difficult.

Kew Technik now offers an amazing easy to use and sensibly priced new tool that will give complete confidence in the knowledge that a perfectly straight cut with no ragged edges will render the cable ready for safe termination to glands or fittings in no time at all.

Blade Runner will cut the outer sheath of SWA cable up to 28mm in diameter, then uniformly score the SWA strands which protect the inner conductors from damage guaranteeing a fast, accurate, 'straight cut'. Just offer the cable up to the tool, turn the thumbscrew onto the cable until it is relatively tight and spin Blade Runner around the circumference of the cable in the direction of the arrow on the tool, tightening occasionally as it cuts through the sheath and then scores the steel wire

Once the steel wire is scored, the tool is removed and the PVC sheath is either pulled off the end of the cable or is carefully cut off using a knife. Then the scored steel wires can be removed by taking several at a time, and working back and forth until they snap off.

Finally, using Blade Runner, cut through only the sheath and remove leaving the stripped and prepared cable ready for termination.

The blade provided in the tool is good for 100 terminations and can be easily replaced in less than a minute using a screwdriver. Each tool comes with one spare blade, with further blades available in packs of three.

Professional Quality, 3 in 1 tool with an innovative pistol design, providing easy stripping and longitudinal cutting of wire sheathes, delivering consistent results time and time again.

The built-in stripping device enables easy cross section stripping on 0.2, 0.3, 0.8, 1.5, 2.5 and 4mm wires and cables.

Fitted with a conical tip enabling easier access in confined areas.
A highly versatile tool for fast and precise dismantling and stripping of common round and damp-proof installation cables (e.g. NYM cables 3 x 1.5mm – 5 x 2.5mm, data cable and coax cable).

An essential tool for electricians and fabrication workshops.

Carl Kammerling international has launched an innovative new steel wired armoured (SWA) cable stripper, designed to speed up the process of SWA cable termination for installers.

Typically done utilising a hacksaw and trimming knife, the conventional method for stripping SWA cable is slow, cumbersome and can result in an uneven cut of the wire strands, and even possible damage to the inner conductors.

The new C.K ArmourSlice ‘strips away the hassle’ of preparing SWA cable for electricians, allowing the job to be done up to 50% faster compared with traditional methods, and ensures a perfect cut every time. Includes free utility blade.

Faster than conventional SWA stripping methods, armour is scored to a uniform depth for a clean break off and trouble free gland connection. Automatic cable clamp provides constant pressure, making retightening a thing of the past.

The wide cable clamp allows precise cuts with perfect blade-to-cable alignment. Rugged all-metal construction with integrated spare blade holder. Comes complete and ready to go with 6 cutting blades.

Faster, Easier, Safer with the new Armourslice EVO, the next evolution in cable stripping technology.

Featuring a new handle design, quick release mechanism and blade mounting system, this tool is optimised to quickly and accurately strip steel armoured cable (SWA) from 12-36mm.