The KT5 is the ultimate in everyday electrical tools, including all modes of voltage detection and an open jaw current measurement capability which enables you to detect open PEN situations.

Voltage detection
Non contact, single pole and two pole voltage detection.

- Non contact voltage test – the first line voltage indication when approaching metal cabinets

- Single pole voltage detection on either probe for added safety and removes the ambiguity of non contact methods

- Two pole voltage detection with permanent GS38 probe tips. This means there are no covers to lose or restrict you in deep reach terminals typically found on devices such RCBOs

The NCV function has three sensitivity levels which give you ability to trace hidden cables.

Popular two pole voltage and continuity tester with bright LEDs and phase rotation indication.

AC & DC Voltage tests up to 690V.
Clear Oversize luminous LED indication.
Phase rotation & bright pen torch.

c/w Built in test leads, Batteries & Printed Instruction Manual with Certificate of Conformity.

Why have multiple item kits when just one will do?!

Safe isolation procedures are a fundamental part of complying with the law and reducing the incidence of electrical accidents. An essential part of the procedure is locking off the circuits, once proven dead, to stop any unauthorised re-energising of circuits.

Unique dual sensitivity non-contact voltage detector.

Voltage indication between 90-600V.
Visual and audible indication.
Indicates between live and dead cables just millimetres apart.

Unlike standard voltage indicators the KEWSTICK DUO has two sensitivity ranges depending on your requirement…

1. Wide ranging voltage indication to detect the presence of voltage between 90-600V without the need for metal contact.

2. Hold down the attenuation button and the KEWSTICK DUO’s sensitivity is reduced to enable you to indicate between live and dead cables just millimetres apart!

The KT1700 is your first level of protection against electrical shock when approaching metal enclosures / potentially live metal work.

Make contact with earth metallic parts such as the externals of a distribution board, water or earth bonding pipes before carrying out safe isolation or putting yourself in harms way for a first indication of any voltage or potential issue.

A proving unit is essential for proving circuits are dead before commencing work. The high output will drive low impedance testers such as traditional test lamps as well as modern two pole testers. It even steps down through the voltage stages to prove each stage as well.

Award winning safe isolation kit complete with the KT1780, proving unit and lock off device.

The importance of safe isolation can never be understated.
Essential and enshrined in law to look after the safety of all personnel, it is vital to have the best procedures and equipment for the job.

The KTWISO2 includes a dedicated two pole voltage tester, high output proving unit in accordance with correct procedure, and a locking off device with warning labels. The kit also comes in a carry case that allows access to the proving unit without the need to remove it.

The KT300DL single function tester, using the latest in technology, provides a slick way to satisfy your requirements for 18th Edition installations as well as a great maintenance instrument. Compact, accurate, easy to use with a ‘hands free’ facility.

The KT300DL improves on the KT300 insulation/continuity tester, providing an additional SPD test and a 30 K ohm continuity range for verifying extraneous conductive parts.