90cm Anzi Ceiling Hood in White
for use with External Motor
This stunning handmade Italian crafted master piece, is the very best in quality.
This extractor has LED lighting, easy to install either into your ceiling or simply lower a box section on your existing ceiling, very powerful 1200m³/hr External motor, remote control, high grade Stainless Steel finish.
This ceiling extractor is designer to be installed with a powerful external weatherproof motor that can be ducted up to 6 metres.
Luxair has 3 different external motors available:
Wall Mounted External Moto
These motors are ideal for situating on an external house wall.
They have a flat rear side that fits flush against the wall.
Pitched Roof External Moto
These motors are best in installed on an angled roof.
They have an angled under side so that the exhaust of the motor is not blowing directly on to your roof tiles.
Flat Roof External Motor - These motors are best suited to being installed on a flat roof. A tower unit is provided to raise the motor from the roof so that the motor is not blowing directly on to your roof tiles.
150mm round (Or rectangular equivalent - 180mm x 95mm) ducting must be used on all Luxair external motors.
This will allow for the highest extraction rate possible for the hood and aid in reducing noise from the motor.
Using ducting less than 150mm (6"") will invalidate your warranty (Subject to registration).
This hood must not be installed higher than 2 meters above your hob.