Panel Heater - 2000w
Convected heat for rapid warm up.
Pre-set background temperature at 5oC below thermostat setting.*
Splash-proof (IPX4) rated, for use in bathroom or wet areas.
* When connected to a programming unit supporting setback feature.
Energy saving features
Compatible with Dimplex 4-zone, wall mounted pilot wire and mains borne signalling multi-heater programmers.
- Thermostat control
User selection of room temperature from 5oC (frost protection) to 30oC using slider control. Slider can be locked in position if required. providing room temperature stability to +/-0.3oC.
- Power controls and indicators
Soft-touch on/off button, together with indicators showing when power to heating is on and when element is operating.
- IP Rating - Splashproof IPX4.
Plug-in control modules - (optional) A range of optional plug-in control modules, which can be removed from the heater for easy programming, provide the flexibility to meet a wide range of control specifications:
- 24-hour Digital Timer (RX24Ti)
1 timer required per heater. Provides 24 hour programmable on/off control.
- Single Zone, Pilot Wire Programmer (RXPW1)
Controls up to 10 slave heaters linked via pilot wire. Provides 7 day programmable on/off control.
- Runback Timer (RXRBTi)
1 timer required per heater. Provides installer programmable runback time up to 4 hours (in 30 min increments.) Can be locked into heater.