Ei RadioLink Wireless Smoke Alarms
Loading …
See product for Accessories
RadioLINK Wireless Smoke Alarms
Fire statistics show that the quicker occupants are alerted to a fire, the less risk of death or injury there is.
Furthermore, property damage is also reduced. But hard wired interconnection is expensive, time consuming and disruptive.
A hard wired system is also difficult and expensive to reconfigure when circumstances (or standards) change.
RadioLINK is the solution.
With RadioLINK, mains powered smoke alarms are interconnected by wireless signals rather than cabling.
It's so much simpler, more convenient - and easier to change or extend as and when required.
The use of radio interconnection in Grade D alarm systems means that it is now much easier to comply
with the extended alarm coverage recommended in BS 5839: Pt.6: 2004.
With no interconnect wiring required, the contractor and specifier can agree fixed costs -
allowing a quicker, simpler and more cost effective solution
to smoke and heat alarm installation.
Add a base to each - Series 140 or 160 Smoke / Heat Alarm in your system - See below
| See product for Accessories |
Technical:Installation / User Guide |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
Radiolink Wireless Smoke Alarms Options
RadioLINK Wireless Smoke Alarms - Options
Technical:Installation / User Guide |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
EI Series 140 Mains Smoke Alarms with Alkaline Battery Back Up
Loading …
Heat Alarms
146RC
Dia: 150mm
Depth: 55mm
146E
Dia: 148mm
Depth: 47mm
See product for Replacement Batteries, Accessories and Batteries
Series 140 Mains Smoke Alarms
with Alkaline Battery Back Up
with Alkaline Battery Back Up
Designed for applications where the budget is a key consideration
and where maintenance is in the hands of the owner occupier
or there is no requirement for lithium power cell back-up.
The 140 Series provides an alkaline battery backup instead of rechargeable cells.
Further cost savings are possible through the innovative and totally unique Easi-fit technology,
as there is no need to purchase additional wiring enclosures, mounting kits, leads or connectors.
In a field where time is money, the fact that Easi-fit alarms are simpler and quicker to install ensures even greater savings.
Now with Easi-fit fixing pack, suitable for use on plasterboard, concrete or wood surfaces
Heat Alarms
146RC
Dia: 150mm
Depth: 55mm
146E
Dia: 148mm
Depth: 47mm
| See product for Replacement Batteries, Accessories and Batteries |
Technical:146E Data Sheet - 500kb pdf 146E Instructions - 1Mb pdf |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
Radiolink Battery Operated Accessories
Loading …
EI 605TYWRF shown
Radiolink Enabled
Battery Operated Smoke / Heat Alarms
Battery Operated Smoke / Heat Alarms
EI 605TYWRF shown
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
Radiolink Battery Operated Accessories
Loading …
Radiolink Enabled
Battery Operated Carbon Monoxide Alarms
Battery Operated Carbon Monoxide Alarms
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
Multi Sensor Optical Smoke and Heat Alarm
Loading …
EI 2110
See product for Accessories
Multi Sensor Optical Smoke and Heat Alarm
As the unit monitors two different by-products of fire, its response to all fire types (e.g. fast flaming, slow smouldering etc.) is vastly improved over traditional single sensor alarms.
The alarm can also be fitted to an Ei168RC RadioLINK base
to allow wireless interconnection of alarms and connection to additional RadioLINK devices.
The alarm also has Remote Control capability -
allowing the alarm to be controlled remotely from an Alarm Control Switch (Ei1529RC).
This allows Alarm Test, Locate and Hush functions to be performed from floor level. If the Ei2110 is also interconnected to other 2110/160RC Series mains powered alarms, then the whole system can be controlled remotely.
Up to twenty alarms can be interconnected which will cause all alarms to sound when one unit senses fire.
A Manual Call Point (MCP401RC) is also available.
| See product for Accessories |
Technical:Installation / User Guide |
|
Product Code
Description
|
Price (ex VAT)
Price (inc VAT)
Quantity
|
|---|---|
