RadioLINK Wireless Smoke Alarms
Interconnecting mains powered smoke alarms is essential to provide the earliest possible warning of a fire.
Fire statistics show that the quicker occupants are alerted to a fire, the less risk of death or injury there is.
Furthermore, property damage is also reduced. But hard wired interconnection is expensive, time consuming and disruptive.
A hard wired system is also difficult and expensive to reconfigure when circumstances (or standards) change.
RadioLINK is the solution.
With RadioLINK, mains powered smoke alarms are interconnected by wireless signals rather than cabling.
It's so much simpler, more convenient - and easier to change or extend as and when required.
The use of radio interconnection in Grade D alarm systems means that it is now much easier to comply
with the extended alarm coverage recommended in BS 5839: Pt.6: 2004.
With no interconnect wiring required, the contractor and specifier can agree fixed costs -
allowing a quicker, simpler and more cost effective solution
to smoke and heat alarm installation.
Add a base to each - Series 140 or 160 Smoke / Heat Alarm in your system - See below