iCON30S Low Profile Fan 111m3/h
Low Voltage c/w Transformer
iCON 30LV is ideal for toilets, wet zones (1 and higher) en-suites, shower rooms and bathrooms.
Recessed into the wall or ceiling, it is stylish and unobtrusive, even in the smallest space.
Also supplied with a narrow contour 'skirt' for surface mounting if preferred.
The quiet, powerful axial fan has been designed with simplicity in mind.
Flow rate up to 31 l/sec ( 111 m3/hr). Ductable up to 9m.
Supplied with a 230v AC mains transformer which can be mounted remotely.
The 12V DC fan conveniently has its controls in the fan and not the transformer.
A quick, core drilled hole enables immediate fixing of iCON 30LV.
The twist on/off cover requires only a single side entry fixing screw.
Cantilever fixing lugs enable recessed installation on uneven surfaces.
The 'snap-in' module is quick to fit and wire.
Tiling is a breeze with the circular cover flange, reducing the need to 'make good' and one wipe and the cover is clean.
Stylish, slim and unobtrusive in walls or ceilings.
Unique iris shutter, prevents back draughts, operates silently and helps reduce noise ingress.
Interchangeable low voltage control modules match fan to installation requirements.
Complies with latest Building Regulations (F1 ventilation). Splashproof, tiling friendly, wipe clean cover.
A comprehensive range of accessories.
The basic iCON 30LV is supplied for remote switching. - No module required
To order an alternative method of control, just select from the modules below
PCSLV - Pull Cord - Manual on/off control by pull cord switch
PCTSLV - Pull Cord / Timer - Manual on/off control by pull cord switch, Adjustable timer 1 to 45 minutes overrun
HTSLV - Humidity - Adjustable humidity setting 40% to 90% RH, adjustable timer and pull cord boost
PRTSLV - Infrared - Passive infrared activation with adjustable timer overrun
PRHTSLV - Infrared - Passive infrared activation with adjustable humidity setting and adjustable timer overrun
Don't forget to add the control module you want from the accessories menu below. Only low voltage module fits low voltage fans. .
Flush - Hole Size - 160mm - To accept motor body Then 110mm for ducting
- Surface - Hole Size - 110mm
- Fitted Dimensions
225mm x 43mm