The latest Quinetic switch design can be used with any receiver including dimming receivers.

Dimming Quinetic Wireless Switch has a formidable range being effective up to 25m indoors, depending on structural conditions.

In addition, 1 to 3 gang switch variants have an IP rating of IP67, giving them ample protection from both dust and rain, allowing them to be used outdoors with a control range of up to 80m.

Innovation of Wireless Kinetic Technology
The Quinetic wireless switch has a built-in micro energy generator.
The action of pressing the switch, generates enough kinetic energy to create and transmit a radio signal
and switch on/off via a receiver (wireless controller) the lamp or other loads.
This solves an age old problem of having to install switch wiring over the past 130 years since
the invention of the light bulb.

No Wiring. No Battery. Easy Installation

The Quinetic In-Line Receiver Switch is a direct replacement for the
traditional wall switch in your home/building.

This new addition for the range combines the wireless receiver normally housed in the ceiling with the wall switch, thus facilitating additional wireless two way or more switches to the circuit.

Please note: the Quinetic In-Line Receiver Switch cannot be paired with other Quinetic receivers,
it can only be paired with Quinetic switches (up to 5).

New design best used with QU WS switches - see bottom 3 product lines listed below

No Wiring. No Battery. Easy Installation and Usage.

The Quinetic wireless architrave switch is compatible with architrave flush and surface boxes.

It can be used with the standard or with the dimming Quinetic receiving controllers.

It has a built-in micro energy generator - when the switch is pressed the kinetic system transforms the movement into energy.
This transmits a signal to the receiver to turn the lamp or other load on or off.
This solves the issue of having to install switch wiring which has been a problem
ever since the invention of the lamp.

A controller can be controlled by a maximum of 10 separate switches, a switch can pair an unlimited number of controllers.

The Quinetic wireless key fob switch is portable and very easy to use.
It has a built-in micro energy generator.
When the switch is pressed, the kinetic system transforms the movement into energy.
This transmits a signal to the receiver to turn the lamp or other load on or off.

Solving the issue of having to install switch wiring which has been a problem ever since the invention of the lamp.

No Wiring. No Battery. Easy installation and usage.

The key fob switch is portable and can be used from up to a maximum distance of 80m oudoors or 25m indoors. There is no longer a need to install back boxes, make holes or channel out for switch lines in the wall if you use the Quinetic wireless switch. The Quinetic switch is safe, convenient and extremely simple to install and use.

N.B. Can be used for dimming when combined with a dimmable receiver.

The Quinetic wireless grid switch is compatible with BG R range Nexus grid system and can be
installed into BG Nexus grid plates.

The switch cover is interchangeable, allowing the usage of any BG R Range Nexus Grid switch cover.

It can be used with the standard or with the dimming

Quinetic receiving controller. It has a built-in micro energy generator
when the switch is pressed the kinetic system transforms the movement into energy.
This transmits a signal to the receiver to turn the lamp or other load on or off.

Can be used along side mains voltage gridswitches

No Wiring. No Battery. Easy installation and usage.

The Quinetic wireless grid switch is compatible with MK grid plus system
and can be installed into MK grid plus plates.

It can be used with the standard or with the dimming Quinetic receiving controller.

It has a built-in micro energy generator - when the switch is
pressed the kinetic system transforms the movement into energy.

This transmits a signal to the receiver
to turn the lamp or other load on or off.

This solves the issue of having to install switch wiring
which has been a problem ever since the invention of the lamp.

Can be used along side mains voltage gridswitches

No Wiring. No Battery. Easy installation and usage.

The Quinetic wireless grid switch is compatible with Varilight Powergrid system
and can be installed into Varilight Powergrid plates.

It can be used with the standard or with the dimming Quinetic receiving controller.

It has a built-in micro energy generator - when the switch is
pressed the kinetic system transforms the movement into energy.

This transmits a signal to the receiver
to turn the lamp or other load on or off.

This solves the issue of having to install switch wiring
which has been a problem ever since the invention of the lamp.

Can be used along side mains voltage gridswitches

No Wiring. No Battery. Easy installation and usage.

The Kinetic wireless grid switch is compatible with Knightsbridge range grid system and can be installed into Knightsbridge grid plates.

The switch cover is interchangeable, allowing the usage of any Knightsbridge Grid switch cover.

It can be used with the standard or with the dimming Quinetic receiving controller.

It has a built-in micro energy generator - when the switch is pressed the kinetic system transforms the movement into energy - This transmits a signal to the receiver to turn the lamp or other load on or off.

The grid switch can be used from a maximum 30m indoors.

There is no longer a need to make holes or channel out for switch lines in the wall if you use the Quinetic wireless switch.

The Quinetic switch is safe, convenient and extremely simple to install and use.

The Quinetic wireless grid switch is compatible with Click Mode MiniGrid system and can be
installed into Click Mode MiniGrid plates.

It can be used with the standard or with the dimming receivers

Quinetic receiving controller. It has a built-in micro energy generator
when the switch is pressed the kinetic system transforms the movement into energy.
This transmits a signal to the receiver to turn the lamp or other load on or off.

Can be used alongside mains voltage gridswitches

The Quinetic wireless grid switch is compatible with the Hager Sollysta range grid system
and can be installed into Hager Sollysta grid plates.

It can be used with the standard or with the dimming Quinetic receiving controller.

It has a built-in micro energy generator - when the switch is
pressed the kinetic system transforms the movement into energy.

This transmits a signal to the receiver
to turn the lamp or other load on or off.

This solves the issue of having to install switch wiring
which has been a problem ever since the invention of the lamp.

Can be used alongside mains voltage grid switches.

No Wiring. No Battery. Easy installation and usage.

The new QUPIRB features an ergonomic design and enhanced detection range. When paired with a Quinetic controller, it enables automatic lighting control - turning the lamp on when it detects human presence and off when no presence is detected.

The sensor includes adjustable settings for lux level, timing and detection distance, and it boasts IP65 weatherproof protection,
making it ideal for both indoor and outdoor use.

Its customisable PIR settings offer flexible and convenient control of lighting in various environments.

This ceiling-mounted, infrared motion sensor can either be embedded in the ceiling or mounted on a flat surface, making installation flexible and versatile, and is powered by a CR123A battery (or can be wired for AC power).

Once the ceiling PIR is paired with a Quinetic wireless receiver, it can turn ON the light/load by wireless control
upon detection of a presence, and turn OFF the light/load once no presence is detected.

The sensor comes ready to be recess mounted. If the ceiling mounted version of the sensor is required,
the PIR can be separated from the recessed base by pressing the buckles at both ends of the base to detach it.

This sensor solution is suitable for use in homes, classrooms, offices, warehouses
or other places where automatic control of lighting is needed.