Grille with fixed louvres and flyscreen for use in ducting systems.

Suitable for wall or ceiling installations in ventilation and extraction setups.

The High Rise Vent Kit can be fully installed from inside the building, avoiding the need for scaffolding
and significantly reducing the cost and complexity associated with these sites.

After core-drilling a 117mm hole, or utilising an appropriate existing hole, the kit simply pushes through from the inside of the building.

Spring pins secure the external grille in position and the external shroud deploys around the grille
covering up break-out from the external surface.

Suitable for 100mm fans.

The NEW Manrose Deluxe Quick Internal Fit Wall Kit can be installed entirely from the inside of a property, reducing installation time and removing the need for costly and time consuming external grille fitting involving scaffolding.

This innovative new wall kit includes an adjustable wall liner and external grille with a rubber seal on the outside of the building.

The wall kit can be adjusted to wall thicknesses anywhere between 225mm and 390mm - just measure the wall, then use the guide on the tube of the wall kit to set it to the correct length.

Simply insert the tube into the hole, deploy the external grille and 3 pins will hold the wall kit securely in place.

The wall kit is also suitable as a passive air inlet grille.