For 3 and 4 gang and alternatives please use Matrix

The Matrix kits allow you to purchase dimmer plates and modules separately,
enabling you to combine different dimmers on one dimmer plate.

c/w Matching Knob(s), Plate Screws, Fixing Nut(s) and Non Metalic Fixing Tool.
Add dimmer modules and switches (see below).

Quick and easy to assemble.

Full dimming control from every dimmer location.

Traditional rotary style dimming with multi-position switching when used with supplementary slave controllers.

Professional Trailing-Edge Dimmers (V-Pro).
Our most versatile dimmer switch.
High quality UK design and manufacture.
Trailing edge for smooth, totally silent dimming.
Intelligent detection of the lamp type for adaptive control of most loads.
Overload protection. Superb performance with most dimmable LED lamps.
Soft start and gentle waveform to considerably extend lamp life

V-DIM is best suited for Incandescent GLS filament lamps

Suitable for Incandescent, mains and low voltage halogen loads.
Thermal overload protection
Senses an overload of heat and temporarily shuts the dimmer down to protect it.

2 Versions
Rotary On/Off and Rotary Dim
Push On/Off and Rotary Dim

V-Com is suitable for LED lamps

Great value V-Com, leading edge push on/off 2 way LED dimmer module.

Can also be used for Incandescent and halogen loads up to max wattage shown

Choose V-Com for LEDs specifying triac dimmer control.

Please check Minimum Load

This dimmerswitch is designed for high frequency
dimmable ballasts that require a 0–10V or 1–10V control signal.

Only acts as a dimmer when used with a V-PRO IR dimmer
Dimming Slave for V-PRO IR Dimmers.

Any number of slave units can be used with V-PRO IR dimmer to allow 2 way and intermediate dimming and switching, so that the lights can be dimmed from more than one location.

Our V-PRO Multi-Point dimmer series comprises programmable intelligent dimmers
with a choice of dimming modes for wider compatibility.
All V-PRO Multi-Point dimmers offer superior dimming technology
to deliver the best possible dimming performance for a given load.
To enhance compatibility with the ever-increasing range of lighting options now available to customers,

V-PRO Multi-Point dimmers are programmable to offer a choice of dimming modes.
In addition, users can set the minimum load level for the dimmer
to optimise the dimming range of a particular lighting load.

Slave for V-PRO Multi-Point
V-PRO Multi-Point Remote Control/Touch Dimmer
allows 2 way and intermediate dimming and switching when used with V-PRO Multi-Point master dimmer

Please Note: This product cannot be used on it's own without connection to a V-Pro IR master dimmer.